Whistler GPS - Factory Settings; Default GPS Engine Configuration; Default Display Configuration; Default Waypoint;Route Starting Numbers

Factory Settings
The following features are default settings when Galileo
™
is turned on for the first time.
GPS Engine:
Power savings on
Navigation on
WGS84 Datum
Greenwich Time measure
Display:
Waypoints and roads only (Internal base map)
North Up map orientation
Distance measuring off
US measurement (miles/MPH)
Waypoints:
Starts with W001
Routes:
Starts with R001
NMEA Output:
Turned OFF
Track Log: (Bread Crumbs)
Turned OFF
Recording Mode – Distance: 300 ft, Time: 10 seconds
Show tracklogs: OFF (for saved track logs)
Factory
Settings
GALILEO
™
GPS
37
Factory Settings