OPERATION
10
Some Powerful Advice.
When driving with the inverter in operation, make certain that
neither the inverter nor the power cords will impede safe
operation of your vehicle. Keep the unit and all cords clear of the
steering wheel, gas, brake and clutch pedals and gear shift.
To maintain your inverter in proper working condition, note the
following important safety precautions:
• MOISTURE. Keep the inverter dry. Do not expose it to moisture.
Do not operate the inverter if you, the inverter, the device being
operated or any other surfaces that may come in contact with
any power sources are wet. Water and many other liquids can
conduct electricity which may lead to serious injury or death.
• HEAT. For peak efficiency, the ambient air temperature should
be between 50° and 80° F. Avoid placing the inverter on or
near heating vents, radiators or other sources of heat. Do not
place the inverter in direct sunlight.
• VENTILATION. In order to disperse the heat generated while
the inverter is in operation, keep it well ventilated. While in use,
maintain several inches of clearance around the top and sides
of the inverter.
• FUMES & GASES. Avoid using the inverter near flammable
materials. Do not place the inverter in areas such as battery
compartments. Where fumes or gases may accumulate.
To Next Page
Loading...
Need help?
General
