EasyManuals Logo

Whistler XTR-130 User Manual

Whistler XTR-130
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
FEATURE DESCRIPTIONS
10.Quiet Button – Pressing QUIET before
a signal is detected engages Auto
Quiet Mode which automatically
reduces the audio level after the initial
warning to a low audio level setting.
Pressing QUIET during a radar/laser
encounter silences audio alerts, while
allowing visual alerts to keep you
informed.
11.X-band Indicator - Shows the unit is
receiving an X-band signal.
12.K/Ka-band Indicator - shows the unit
is receiving a K-band and Ka-band
signal.
13.H - Highway Indicator - Shows that
the unit is operating in city mode.
14.C - City Indicator - Shows that the
unit is operating in City Mode.
15.Signal Strength Indicator - Shows the
strength of the signal being detected.
16.V/L- Shows that the unit is receiving a
VG-2 or Laser signal.
17.VG-2 Button- Engages VG-2
detection mode.
INSTALLATION
56
Mounting Guidelines
Mount the unit as low as possible near the
center of the windshield.
Do not mount your unit behind wipers,
ornaments, mirrored sunscreens, etc. These
obstructions have metal surfaces which can
affect radar and laser signals and reduce critical
warning time. (Regular tinted glass does not
affect reception.)
Some windshields have an Instaclear
or
Electriclear
type coating, which affect radar
signals. Consult your dealer or the owner’s
manual supplied with your vehicle to
determine if your windshield has this coating.
Avoid placing unit in direct contact with wind
shield.
To reduce the possibility of theft, conceal your
unit when not in use.
Windshield Mounting
Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
Press the suction cups onto the windshield at
the location you have chosen.
IMPORTANT:
Make sure the unit is level.
IMPORTANT: Some newer cars have a plastic
safety coating on the inside of the windshield.
The windshield bracket may leave permanent
marks on this type of surface. To find out if your
vehicle has this type of windshield, check the
owners manual or ask your dealer. We recom-
mend that you do not leave the suction cup
bracket on the window in direct sunlight. If the
detector is removed, this may cause blistering of
the dash in some vehicles.
INSTALLATION
7
Rubber Bumper

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Whistler XTR-130 and is the answer not in the manual?

Whistler XTR-130 Specifications

General IconGeneral
Product colorBlack
Detection angle360 °
False alarm controlYes
Scrambling functionLaser, Radar
Radar bands detectionK, Ka, X
Weight and Dimensions IconWeight and Dimensions
Depth105.4 mm
Width72.4 mm
Height31.75 mm
Weight156 g

Related product manuals