Need help?Do you have a question about the Whistler CR93 and is the answer not in the manual?
General| Power Source | 12V DC |
|---|---|
| Ka Band | Yes |
| K Band | Yes |
| X Band | Yes |
| Laser Detection | Yes |
| POP Mode Detection | Yes |
| 360° Coverage | Yes |
| City/Highway Modes | Yes |
| Quiet/Auto Quiet Modes | Yes |
| Voltage | 12V |
| Frequency Bands | X, K, Ka, Laser |
| Display | Text Display |
High-efficiency antenna for receiving radar signals.
Optical lens for enhanced sensitivity in laser detection.
Waveguide for superior detection of rear-transmitted laser signals.
Recommendations for optimal unit placement and avoiding obstructions.
Steps for attaching the unit to the windshield using suction cups.
Instructions for connecting the power cord to the unit and vehicle.
Silences audio alerts during detection or cancels Auto Quiet.
Reduces false alerts in urban environments with varying sensitivity.
Provides full audio warnings for all detected radar/laser signals.
Minimizes false alerts from other radar detectors or sensors.
Eliminates alerts from specific traffic flow or blind spot sensors.
Identifies Ka band radar frequencies for better threat assessment.
Identifies laser pulse rates and potential lock-out of false signals.
Step-by-step instructions for updating the unit's firmware and database.
Addresses common problems like unit not turning on or false alarms.
Information on laser and radar speed detection technologies.
To Next Page
