EasyManua.ls Logo

White Outdoor ZT-1850, ZT-2150, ZT-2250 User Manual

White Outdoor ZT-1850, ZT-2150, ZT-2250
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Zero Turn Tractor
Models
ZT-1850, ZT-2150, &
ZT-2250
PRINTED IN U.S.A.
FORM NO.
770-10104E.fm
(10/00)
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-9722.
WHITE OUTDOOR PRODUCTS COMPANY P.O. BOX 361131 CLEVELAND, OHIO 44136-9722
OPERATOR’S MANUAL

Questions and Answers:

White Outdoor ZT-1850, ZT-2150, ZT-2250 Specifications

General IconGeneral
BrandWhite Outdoor
ModelZT-1850, ZT-2150, ZT-2250
CategoryLawn Mower
LanguageEnglish

Summary

Finding Model Number

Calling Customer Support

Contact customer support for assistance with product assembly, operation, or maintenance.

Maintaining Safety

General Operation Safety

Essential safety instructions for operating the machine and ensuring operator and bystander safety.

Slope Operation Safety

Guidelines for safe operation on slopes to prevent tip-overs and loss of control.

Children Safety Guidelines

Precautions to prevent accidents involving children during operation.

Service and Maintenance

Safe Gasoline Handling

Critical safety procedures for handling and storing gasoline to prevent fire and explosion.

General Service Procedures

Routine maintenance checks and procedures for safe operation and longevity.

Slope Gauge Guide

Know Your Z-Series

Ignition and Light Switch

Location and function of the ignition and headlight switch for starting and lighting.

Hour Meter Function

Details on the hour meter for tracking engine operation and maintenance intervals.

Operating Your Z-Series

Pre-Operation and Safety

Checks before operation, including fuel, oil, guidelines, and safety interlocks.

Starting and Stopping Engine

Step-by-step instructions for starting and safely stopping the engine.

Driving Operations

Guidance for driving the Z-Series, including on slopes and general movement.

Operator Controls and Features

Electric PTO Control Operation

How to engage and disengage the power take-off for the cutting blades.

Throttle and Choke Lever Usage

Operation of the throttle for engine speed and choke for cold starts.

Lift Handle and Deck Height Adjustment

How to adjust the mower deck cutting height using the lift handle.

Indicator Panel Lights

Understanding the warning lights on the indicator panel for engine oil and battery status.

Seat Adjustment Lever

Procedure for adjusting the operator's seat for comfort and proper positioning.

Driving and Steering Controls

Brake Pedal Operation

How to use the brake pedal for slowing, stopping, and engaging the parking brake.

Drive Handles and Steering

Operation of the drive handles for movement, steering, and stopping the Z-Series.

Speed Control Bar

Adjusting the speed control bar for pre-set maximum travel speed.

Mowing and Unit Handling

Mowing Procedures

Recommended methods for efficient and clean mowing with the Z-Series.

Pushing Your Unit

Procedure for disengaging hydrostatic pumps to manually push the unit.

Quick Reference Chart

Visual guide to drive handle positions and resulting Z-Series movement.

Making Adjustments

Adjusting Mower Deck Height

Steps to set the desired cutting height for the mower deck.

Adjusting Seat Position

How to adjust the operator's seat forward or backward.

Brake and Steering Adjustments

Checking Brake Adjustment

Procedure to check if the brake force is adequate and requires adjustment.

Adjusting Brake Force

Steps to increase or decrease brake force by adjusting the brake rods.

Steering Adjustment

Process for adjusting the steering mechanism, including drive handles.

Maintaining Your Z-Series

Lubrication Points

Locations of grease fittings for lubrication of key components.

Component Maintenance

Engine Maintenance

Instructions for servicing the engine, including air cleaner and spark plug.

Fuel Tank Care

Guidance on filling and maintaining the fuel tank.

Fluid and Electrical System Care

Hydraulic Oil Service

Procedures for checking, adding, and draining hydraulic oil.

Lamp Bulb Replacement

Steps to replace the headlight bulb.

Fuse Replacement

Procedure for locating and replacing the fuse.

Battery, Tires, and Belts

Battery Maintenance

Cleaning and care for the sealed battery and terminals.

Battery Charging

Instructions for charging the battery after periods of non-use.

Tire Information

Importance of tire inflation pressure for stability.

Drive Belt Removal

Steps for inspecting and replacing the drive belt.

Mower Deck Maintenance

Checking Mower Deck Level

Procedure to ensure the mower deck is level for optimal cutting performance.

Mower Deck Service Procedures

Removing the Mower Deck

Step-by-step guide for safely detaching the mower deck from the tractor.

Deck Belt and Installation

Installing Mower Deck Belt

Instructions for routing and installing the mower deck drive belt.

Installing the Mower Deck

Procedure for reattaching the mower deck to the tractor.

Troubleshooting Guide

Troubleshooting Common Issues

Table of common problems, their causes, and corrective actions.

Manufacturer's Limited Warranty

How to Obtain Service

Information on how to get warranty service and locate dealers.

Related product manuals