What to do if White Point Washer does not intake water?
If your White Point Washer isn't taking in water, here's what you should check: First, make sure the water tap is turned on. Next, inspect the water inlet hose for any twists and untwist it if necessary. Also, the water inlet hose or the valve inlet filter might be clogged, so clean these filters. Finally, ensure that the machine door is completely closed.
Why my White Point WPW 5413 S does not start?
Your White Point Washer might not start due to several reasons: it may not be plugged in, so ensure it is properly connected to the power outlet. Check the fuses and replace them if they are out of order. Verify that there is no electricity cut-off by checking the mains power. Make sure you have pressed the Start/Pause button. Ensure the program dial is not in the ‘stop’ position; if it is, switch it to the desired program. Finally, confirm that the machine door is completely closed.
Covers correct domestic use, warranty, pet safety, and supervision for children.
Ambient temperature, hose freezing, and foreign objects in pockets are discussed.
Precautions to prevent children's access and potential harm from the machine.
Advice on maximizing efficiency and saving electricity and water during operation.
Step-by-step guide to remove transport screws for safe operation.
Instructions on how to adjust the machine's feet for stability and vibration reduction.
Guidelines for connecting the washing machine to the power supply safely.
Detailed instructions for connecting the water inlet hoses correctly.
Proper methods for connecting the water discharge hose to prevent flooding.
Common causes and solutions for the machine failing to start or draw water.
Solutions for problems related to the spinning cycle not performing or running late.
Details error E04, which signifies the machine having too much water.
General| Brand | White Point |
|---|---|
| Model | WPW 5413 S |
| Category | Washer |
| Language | English |
To Next Page