Need help?Do you have a question about the White 415 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Stitch Length | 4mm |
| Stitch Width | 5mm |
| Built-in Needle Threader | No |
| Free Arm | Yes |
Identifies principal parts of the sewing machine with diagrams and labels.
Lists and describes the various accessories included with the sewing machine.
Provides instructions for connecting the sewing machine head to its case or cabinet.
Guides users on choosing appropriate needles and threads for different fabrics.
A chart correlating fabric types with recommended needles and thread weights.
Step-by-step instructions for replacing the sewing machine needle.
Instructions for swapping the needle plate for cleaning or specific stitch types.
Explains how to choose and use different presser feet for various sewing tasks.
Detailed steps on how to wind thread onto a bobbin.
Guide on threading the upper thread through the machine.
Instructions for properly threading the bobbin case.
How to correctly insert the bobbin case into the shuttle assembly.
Explains the function and operation of the stitch length adjustment.
How to use the button for sewing in reverse.
Details on adjusting the needle's swing for stitch width.
How stitch length and width interact for different stitch results.
How to switch between ordinary and stretch stitching modes.
How to select various stitch patterns available on Model 426.
How to use the selector for blind hem stitching on Model 415.
Guidance on setting upper and bobbin thread tensions for balanced stitches.
How to adjust presser foot pressure and feed dog height.
Information on the machine's built-in sewing light.
Instructions for using the buttonholer attachment.
How to use the control for decorative stitching and embroidery.
Initial steps before starting to sew, including pinning and needle check.
Techniques for guiding fabric accurately during sewing.
Method for pivoting the fabric to sew around corners.
Tips for sewing curved seams, including stitch length adjustment.
How to navigate thick seams without damaging the machine.
Proper procedure for removing fabric from the machine.
Instructions for sewing straight seams on various fabrics.
Using stitches for temporary seams or decorative topstitching.
How to repair worn spots or holes using darning stitches.
Techniques for inserting cording and sewing zippers.
Using a quilting guide for stitching parallel lines.
Using zigzag stitch for overcasting fabric edges to prevent fraying.
Using narrow zigzag for strong seams on knit fabrics.
Step-by-step guide to sewing buttons onto fabric.
How to create a thread shank for buttons.
Using close zigzag stitches for decorative effects.
Creating tapered designs and monograms with embroidery control.
Creating various designs by manipulating fabric during sewing.
Techniques for creating personalized monograms by hand.
Applying decorative fabric shapes to garments or articles.
Using a zigzag stitch over a cord for gathering fullness.
Attaching lace and trims to garments or linens.
Creating a decorative hem finish on knit fabrics.
Tips for achieving a dainty hairline finish on seams.
Using zigzag stitch to shape darts in interfacing.
Applications for the multiple zigzag stitch feature.
General information and preparation for sewing buttonholes.
Instructions for creating buttonholes using the machine's feature.
Method for sewing a buttonhole that turns.
How to create a reinforced buttonhole using cording.
Steps for sewing an invisible blind hem.
Reinforcement stitch for knits and wovens in stress areas.
Using a heavier straight stitch for decorative topstitching.
Stitches for maximum strength and elasticity on stretch fabrics.
Instructions on where and how often to oil the sewing machine.
Procedure for cleaning and oiling the shuttle mechanism.
How to adjust the bobbin winder for even thread winding.
Steps for adjusting or replacing the motor drive belt.
Troubleshooting guide for common sewing machine issues.
How to mount various attachments like binders and hemmers.
Using the edgestitcher for lace insertions, edgings, and piping.
Instructions for using the binder to fold and apply bias binding.
How to apply folded bias binding using the binder.
Applying two different bindings simultaneously.
Using the binder for hand-cut bias strips.
Using various hemmers to create different width hems.
How to use the ruffler attachment for pleating and ruffling.
Instructions for creating narrow hems with the attachment.
Sewing narrow hems and attaching lace in one step.
Attaching lace to fabric edges using an invisible stitch.
How to sew a French seam using the hemmer.
Technique for hemming across an existing seam.
To Next Page
