Need help?Do you have a question about the White Snow Boss 950 and is the answer not in the manual?
General| Brand | White |
|---|---|
| Model | Snow Boss 950 |
| Category | Snow Blower |
| Language | English |
Initial guidance for safe operation before using the snow thrower.
Essential checks and steps to perform before starting the snow thrower.
Guidelines for safe and effective use of the snow thrower during operation.
Information regarding shear bolts used to protect the auger mechanism.
Step-by-step instructions for assembling the snow thrower's handles.
Connecting the shift rod for proper gear and direction control.
Assembling the mechanism used to control chute direction.
Connecting control cables and the headlight for proper function.
Specific instructions for attaching the chute crank on 5.5 HP models.
How to adjust the auger drive clutch for optimal performance.
Adjusting the drive clutch and shift lever for proper operation.
Adjusting the skid shoes for ground clearance based on terrain.
Operation of key controls like shift lever, clutches, and chute crank.
Operation of chute tilt, headlight, throttle, ignition, and fuel valve.
Procedures for adding fuel and oil to the engine.
Safe usage instructions for the electric starter system.
Step-by-step guide for starting the snow thrower engine.
Proper procedure for shutting down the snow thrower engine.
How to engage propulsion and snow throwing mechanisms.
Use of tire chains, operating advice, and general tips.
Adjusting the chute's discharge angle.
Adjusting the traction drive clutch.
Adjusting the auger clutch for proper engagement.
Adjusting the shift rod for accurate gear selection.
Adjusting drive wheel engagement for maneuverability or traction.
Engine, wheels, chute crank, gear shaft lubrication.
Drive/shifting mechanisms, clutch locks, and gear case lubrication.
Engine maintenance procedures from the separate manual.
Checking and replacing auger shear bolts and shear bolts.
Maintenance of the shave plate and skid shoes for wear.
Steps for removing and replacing drive and auger belts.
Procedures for removing and replacing the drive belt.
Replacing the friction wheel rubber due to wear.
Steps to prepare the unit for long-term storage.
A guide to common problems, their causes, and corrective actions.
Procedure for obtaining warranty repair or replacement service.
Purchaser's responsibility for shipping costs for warranty claims.
Information on separate warranties for engine and component parts.
Explanation of how state laws affect warranty rights.
To Next Page
