White Snow Boss 1050 User Manual

Read manual, familiarize with controls, keep safe for future.

Inspect area, remove debris, wear proper clothing, use safety precautions.

Keep clear of moving parts, exercise caution, stop engine when leaving.

Bolts secure augers, designed to shear on impact, replacements provided.

Instructions for assembling the upper and lower handle sections.

Instructions for attaching chute crank for specific engine model.

Connecting the headlight wire to the engine wire lead.

Adjust auger drive clutch cable for proper slack and engagement.

Adjust traction drive clutch and shift lever for smooth operation.

Controls ground speed, has six forward and two reverse positions.

Squeeze grip to engage augers, release to stop snow throwing.

Engages wheel drive and can lock auger clutch for chute control.

Service engine with gasoline and oil as per engine manual.

Steps to start the engine using recoil or electric start.

Procedures for stopping the engine safely.

Steps to engage the drive for forward or reverse movement.

Steps to engage the augers for snow throwing.

Minor adjustments may be needed for optimal engine performance.

Adjust wheels for one-wheel or both-wheel drive operation.

Refer to engine manual for all engine lubrication instructions.

Lubricate wheel bearings and grease axles.

Lubricate chains, sprockets, gears, and shifting mechanism seasonally.

Check shear bolts, replace if sheared.

Check for wear and replace as necessary.

Instructions for removing and replacing auger belts.

Steps for replacing the drive belt.

Drain fuel, add oil to cylinder, clean, lubricate, and store in a clean dry area.

Contact local dealer or customer service for service.

Warranty gives specific legal rights that vary by state.