To Next PageTo Next PageWhat to do if White 550 loses power?
If your White Snow Blower is losing power, check these items: * Ensure the spark plug wire is securely connected and tightened. * Make sure the gas cap vent hole isn't plugged by ice or snow; clear it if necessary. * The exhaust port might be plugged.
Why does White 550 engine run erratically?
An erratic engine in your White Snow Blower can stem from a few causes. Check if the unit is running on CHOKE and move the choke lever to the OFF position. A blocked fuel line or stale fuel could also be the culprit; clean the fuel line and refill with fresh fuel. Water or dirt in the fuel system can also cause issues; drain the fuel tank and carburetor, then refill with fresh fuel.
What to do if White 550 fails to discharge snow?
If your White Snow Blower isn't discharging snow, immediately stop the engine and disconnect the spark plug wire. Check for a clogged discharge chute and clean it, along with the auger housing. Also, inspect the auger for any foreign objects and remove them. For auger control cable or auger belt issues, refer to Section 6 and Section 8 of this manual.
Why White 550 engine overheats?
If your White Snow Blower engine overheats, the carburetor may not be adjusted properly. Refer to the engine manual or have it adjusted by an authorized engine service dealer.
What to do if White 550 Snow Blower has excessive vibration?
If your White Snow Blower is vibrating excessively, stop the engine immediately and disconnect the spark plug wire. Tighten all bolts and nuts. If the vibration continues, have the unit serviced by an authorized service dealer.
How to fix White Snow Blower that fails to propel itself?
If your White Snow Blower isn't propelling itself, the traction control cable may need adjustment. Also, the drive belt might be loose or damaged.
General| Brand | White |
|---|---|
| Model | 550 |
| Category | Snow Blower |
| Language | English |
Instructions for operators before assembly or operation.
Steps for preparing the snow thrower and the area before use.
Guidelines for safely operating the snow thrower, including controls and hazards.
Details on shear bolts, their function, and replacement.
Steps to adjust the auger control for correct operation.
How to adjust skid shoes for different terrain conditions.
Procedure for setting tire pressure for optimal handling.
Information on the snow thrower's headlight operation.
Explanation of the shift lever and its speed/direction settings.
Description of the combined traction and auger control lock function.
How to engage and disengage the auger drive clutch.
Instructions for filling fuel and checking oil before operation.
Information on using the electric starter safely and correctly.
Adjusting the chute for desired snow throwing distance.
Adjusting the support bracket for the chute directional control.
Adjusting skid shoes for proper ground clearance.
Adjusting the auger control for proper engagement.
Detailed steps for adjusting the traction control system.
General lubrication points and frequency for snow thrower components.
Maintenance steps for the drive wheels and axle.
Reference to engine manual for maintenance procedures.
Checking and replacing wear items like shave plates and skid shoes.
Common causes and remedies for engine starting problems.
Troubleshooting steps for an engine running unevenly.
Causes and solutions for a snow thrower losing power.
Reasons and fixes for engine overheating.
Addressing causes of abnormal vibration during operation.
Troubleshooting steps when the unit does not move.
Diagnosing and fixing issues with snow discharge.
