White YARD BOSS 950 - Safety Labels and Warnings; Understanding Safety Labels

SECTION 2: SAFETY LABELS FOUND ON YOUR UNIT.
I - '
i
ROTATING BLADES INSIDE. KEEP HANDS AWAY FROM ALL OPENINGS. DO NOT
REMOVE OR ATTACH NOZZLE OR OPTIONAL HOSE KIT WHEN ENGINE IS RUNNING! ,
S30183I
A DANGER
ROTATING CUTTING BLADES.
KEEP HANDS AND FEET OUT
OF OPENINGS WHILE MACHINE
IS RUNNING. S30181
DO NOT OPERATE THIS UNIT WITHOUT
ENTIRE BAG AND DISCHARGE CHUTE
IN PLACE. TURN THE ENGINE OFF AND
ALLOW THE IMPELLER TO COME TO A
COMPLETE STOP BEFORE REMOVING
THE BAG. S30i3i|
A WARNING
TO AVOID SERIOUS INJURY
♦ Read Owner's Manual and all safety labels on machine before starting and using machine.
♦ Keep hands, feet, face, long hair and clothing out of chipper inlet, vac Inlet, and discharge
area. There are ROTATING BLADES inside these openings.
♦ Wear approved safety glasses and gloves. Avoid loose fitting clothes.
♦ Keep the area of operation clear of all persons, particularly small children and pets.
♦ Keep all shields and guards (e.g. upper chipper chute extension, discharge chute, nozzle
assembly) In place and securely attached.
♦ Check bag frequently for wear. Replace if worn or damaged.
♦ If unit becomes clogged or jammed, shut off engine right away. Do not attempt to dear
clog or jam with engine running. Refer to Maintenance Section of Owner's Manual for
unclogging instructions.
♦ Muffler and engine get hot and can cause burns. Do not touch. To avoid a fire hazard, ^
keep leaves, grass, and other
combustible debris off hot muffler a
and engine. a
♦ Do not attempt to remove or attach a
vac nozzle or optional Hose Kit a
with engine running. Do not a
operate unit unless nozzle or a
optional Hose Kit is secured a
in place. a
♦ Do not fill gas tank while a
engine is running. a
Allow eng ine to cool at a
least 2 minutes a
before re-fueling. a