15
Problem Possible Causes Solutions
Display flashing
• Set temperature has not
been reached
• It is normal for the display to flash until
the unit reaches the set temperature.
Please note that the unit may take unto
24 hours to reach the set temperature if
the cabinet is full.
Display “E1”, “E2”.
“E5”, “E6”, “EU”, “LO”, or “HI”
• E1 E2 - air temperature sensor error
• E5 E6 - defrost sensor error
• EU - display error
• LO - low temperature alarm
• HI - high temperature alarm
• Contact Whynter Customer Support
The icon “--” is lit up and
flashing in the temperature
display
• The display temperature is out
of the range
• Only temperatures within the range
16 - 99°F/-9 - 37°C the appliance can
display will be shown. If the tempera-
ture is not within this range, the icon “--”
will be displayed instead. That is nor-
mal.
Troubleshooting
To Next Page
Loading...
Need help?
General
