13
Loading Plan
STORAGE
Beverage cans may differ in size and dimensions so the actual number of beverage cans can be stored may
vary. The 231 can capacity is approximate maximums when storing traditional 12 oz. can.
You may load your beverage cans in single row or by stacking while taking note of the following: if you do not
have enough beverage cans to fill your refrigerator, it is better to distribute the load throughout the refrigera-
tor so as to avoid “all on top” or “all below” type loads.
You can remove or relocate adjustable shelves to accommodate larger type of cans or bottles (see re-
moving shelves).
Keep small gaps between the walls and the beverage cans or bottles to allow air circulation.
Do not over load your beverage refrigerator.
Avoid obstructing the internal fans (located inside on the back panel of the beverage refrigerator).
Do not try to slide the shelves outwards beyond the fixed position to prevent the beverage cans from fall-
ing.
Do not pull out more than one loaded shelf at a time as this may cause the beverage refrigerator to tilt
forward if not properly installed.
To Next Page
Loading...
Need help?
General
