CLEANING
CLEANING
AND
AND
MAINTAINING
MAINTAINING
YOUR
YOUR
ICE
ICE
-CREAM
-CREAM
MAKER
MAKER
Before using your ice-cream maker, it is strongly recommended to clean it thoroughly.
1. Turn the transparent cover by counterclockwise, be sure the arrow on lid is lined up with the
lock icon on the base, and then you can take the cover out.
2. Take out the paddle and ice-cream mixing bowl.
3. Use a dry, clean, soft cloth to clean the internal wall of the ice-cream making house
smoothly, no need to use water or wet cloth to clean it.
4. The outside of the unit should be cleaned regularly with a mild detergent solution and warm
water. DO NOT immerse the compressor/motor base in water. It will wet the inside electrical
parts and cause the electrical safety problem.
5. Then you can put the transparent cover, paddle, ice-making mixing bowl, and the ice-cream
scoop into the water, and use the wet and soft cloth to clean them. Then dry them before
running the unit. Warning: Don’t use the abrasive tool to wipe them.
6. Dry all the parts and exterior with a clean soft cloth.
7. Put back all the parts to the original position.
8. When the machine is not to be used for a long time, clean & dry all the parts and the unit.
To Next Page
Loading...
Need help?
General
