To Next PageTo Next Page
Need help?Do you have a question about the Whynter WC-282TS and is the answer not in the manual?
General safety precautions for using the appliance, including hazard symbols.
Key guidelines to reduce the risk of fire, electrical shock, or injury.
Specific warnings for model installation and usage.
Labeled diagram of wine cooler parts and controls.
Summary of key features like capacity, cooling, shelves, and lighting.
Detailed specifications including model, voltage, power, and dimensions.
Critical safety warnings related to appliance installation.
Step-by-step guide for setting up the wine cooler, including leveling.
Guidelines for safe electrical hookup and extension cord usage.
How to set temperature and operate interior lighting.
Instructions for leveling the unit and information on bottle storage.
Ideal temperature settings and advice for preparing for storage.
Procedure for manual defrosting if frost builds up.
Instructions for cleaning interior and exterior surfaces.
Guidelines for safely moving and storing the appliance.
Advice on optimizing the appliance's energy efficiency.
Solutions for problems like not operating or temperature issues.
Solutions for noise, condensation, and door closure problems.
Solutions for frost buildup inside the appliance.
Details on what the warranty covers and its limitations.
Information on how to obtain service or contact the manufacturer.
The Whynter 28 Bottle Touch Control Stainless Steel Freestanding Wine Cooler (Model #: WC-282TS) is a specialized appliance designed for the optimal storage and cooling of wines. It utilizes thermoelectric cooling technology, which is known for its vibration-free operation, ensuring that the delicate wine sediment remains undisturbed. This makes it an ideal choice for preserving the quality and flavor of your wine collection. The cooler is suitable for various settings, including offices, yachts, or homes, serving as a stylish and functional centerpiece.
The primary function of this appliance is to maintain a consistent and controlled temperature environment for wine storage. It features an adjustable thermostat with a temperature range of 54°F to 66°F, allowing users to select the ideal temperature for different types of wine, whether it's for conservation, red wines, dry/white wines, or rosé wines. The thermoelectric cooling system, coupled with an internal fan-forced circulation, ensures even temperature distribution throughout the cabinet, preventing hot or cold spots that could compromise wine quality. The unit is designed for freestanding installation, meaning it should not be built into cabinetry, to ensure adequate airflow and optimal performance.
The wine cooler is equipped with a user-friendly soft-touch digital control panel, which provides intuitive and precise temperature control. Users can easily adjust the desired temperature using the "Up" and "Down" buttons. Once set, the temperature display will flash for a few seconds before reverting to the actual internal temperature. An enhanced LCD temperature display makes it easy to monitor the internal conditions.
For visibility, the cooler includes soft interior LED lighting with an on/off switch, allowing users to illuminate their wine collection without exposing it to harmful UV light or excessive heat. This feature is particularly useful for showcasing bottles or finding a specific wine.
The appliance comes with six premium stainless steel trimmed scalloped shelves, designed to securely hold wine bottles. These shelves are crafted to accommodate standard 750ml wine bottles, though the total capacity may vary for other bottle sizes. For ease of access, the shelves can be pulled out approximately 13 inches from the railing. If users encounter difficulty fitting the stated number of bottles, the wine racks can be flipped over to optimize space. When pulling out or removing shelves, it is important to ensure the door is fully open to prevent damage to the door gasket.
The wine cooler is designed with solid state components, contributing to its long lifespan and reliable performance. It is also ETL Certified, indicating that it meets specific safety standards.
Proper care and maintenance are crucial for ensuring the longevity and optimal performance of the Whynter wine cooler.
Before any cleaning or maintenance, it is essential to turn off and unplug the appliance to prevent electric shock or personal injury. All contents should be removed and stored in a suitable place. The interior, door seal, and inside of the glass door should be cleaned with a clean, damp cloth. It is important to avoid using detergents or other substances that emit odors, as these can damage or discolor the interior and potentially contaminate the wine. When cleaning the exterior, the door should be kept closed to prevent detergent odors from entering the appliance. The side panels and door surfaces can be cleaned with a clean, soft, and moist cloth, or a microfiber cloth. The humidity tray, if present, should be hand-washed with water and detergent, thoroughly rinsed, and then replaced.
Under most ambient conditions, the wine cooler typically does not require manual defrosting. However, in cold ambient temperatures or high humidity, frost may accumulate. If this occurs, users should remove all items, unplug the unit, and leave the door open to allow the frost to melt naturally. It is crucial never to use a knife or other metal instrument to scrape off ice or frost, as this can damage the appliance. After defrosting, the unit can be plugged back in and the desired temperature reset.
For the appliance to function correctly, it must be level. The wine cooler is equipped with leveling legs at the bottom that can be rotated to adjust the height. Users can use a carpenter's level to check if the appliance is level from front to back and side to side. Rotating the leveling feet to the right lowers that side of the refrigerator, while rotating them to the left raises it. The WC-282TS specifically features three large leveling legs and one small leveling leg under the door hinge.
If the wine cooler will not be used for an extended period or needs to be moved, it should be defrosted and the interior dried thoroughly. Disconnect the power supply by removing the plug from the wall socket. Leave the door open to allow for air circulation and to prevent mold, mildew, and unpleasant smells. When moving the appliance, all internal items should be removed. Loose items, such as shelves, should be securely taped down (painter's tape is recommended). The adjustable legs should be turned up to the base to prevent damage. The door should also be taped shut. During transportation, the appliance should remain in an upright position and be protected with a blanket or similar item to prevent damage. If there are children in the household, additional precautions, such as removing the door, should be considered to prevent a child from being trapped inside.
To maximize energy efficiency, the appliance should be located in the coolest area of the room, away from heat-producing appliances and direct sunlight. Adequate ventilation is important, so the air vents should never be obstructed. The door should be closed tightly and not opened too frequently or for extended periods. Storing contents in an organized manner and avoiding over-filling the appliance will allow for proper air circulation, contributing to better energy efficiency.
The manual provides a comprehensive troubleshooting guide to address common issues such as the appliance not operating, not reaching the desired temperature, frost formation, frequent cycling, excessive noise, and condensation on the glass door. Solutions range from checking power connections and adjusting temperature settings to ensuring proper door closure, cleaning gaskets, and addressing ambient conditions. For instance, if the appliance is not operating, users should check for power failure, ensure it's plugged in, and verify that circuit breakers or fuses are intact. If the unit is making too much noise, it could be due to normal fan operation, expansion/contraction of internal walls, or an unleveled appliance.
Overall, the Whynter 28 Bottle Touch Control Stainless Steel Freestanding Wine Cooler is designed for reliable, efficient, and elegant wine preservation, with features that prioritize both performance and user convenience.
General| Type | freestanding |
|---|---|
| Size | compact |
| Color | stainless steel |
| Bottle Capacity | 28 |
| Minimum Wine Cooler Temperature | 54 degrees fahrenheit |
| Maximum Wine Cooler Temperature | 66 degrees fahrenheit |
| Defrost System | no |
| Number of Shelves | 6 |
| Number of Temperature Zones | 1 |
| Temperature Control | digital |
| Interior Light | yes |
| Child Lock | no |
| Humidity Control | no |
| Smart Home | no |
| Voltage | 120 volts |
| Current | 1 amperes |
Weight and Dimensions| Depth | 20 1/2 inches |
|---|---|
| Height | 29 inches |
| Width | 18 1/9 inches |
| Net Weight | 44 pounds |
