Whyte G-160 Works User Manual

MTB Full Suspension Range
G-160 Works & G-160 RS
T-130-C Works & T-130-C RS
T-130 RS, T-130 S & T-130 SX Women’s Spec
T-129 SCR, T-129 RS & T-129 S
Supplementary Service Manual
2016 Edition 1

Whyte G-160 Works Specifications

General

Brand	Whyte
Model	G-160 Works
Category	Bicycle
Language	English

Summary

1.0 Introduction

2.0 Geometry

2.1 Whyte G-160 Geometry

Provides detailed frame geometry specifications for the Whyte G-160 model.

2.2 Whyte T-130-C & T-130 Geometry

Details frame geometry for Whyte T-130-C and T-130 models across various sizes.

2.3 Whyte T-129 Geometry

Presents frame geometry specifications for the Whyte T-129 model across different sizes.

3.0 Preparations for Riding

3.1 Making Adjustments

Guidance on adjusting bike components, referring to manufacturer instructions.

3.2 Whyte Inter Grip Seat Clamp Adjustment & Service

Details on adjusting and servicing the Whyte Inter Grip Seat Clamp.

3.3 Set Up of Fork

Instructions for setting sag and rebound damping on the front suspension fork.

3.4 Set Up of Rear Damper

Guide to setting sag and rebound damping for the rear suspension shock absorber.

3.5 Suspension Tuning Log

A log to record suspension settings for future reference and tuning.

4.0 Safety

Maximum Weight Limit

Specifies the maximum weight limit for Whyte G-160, T-130-C, T-130 & T-129 bikes.

Designed for the following use

Details the intended use and safety standards for Whyte T-129 and G-160/T-130 models.

5.0 Lubrication

5.1 Whyte Inter Grip Seat Clamp

Specific guidance on lubricating the Whyte Inter Grip Seat Clamp components.

5.2 General Whyte Lubrication

Information on general lubrication regimes and maintenance for Whyte bicycles.

6.0 Servicing the Rear Suspension

6.1 Removing the Rear Shock and Swinging Arm

Procedures for removing rear shock absorber and swinging arm from G-160, T-129, T-130.

6.2 Stripping and Re-assembling Bearings

Detailed steps for removing and reinstalling suspension bearings.

6.3 Re-assembling the Rear Suspension

Instructions for putting the rear suspension components back together.

7.0 Servicing the Whyte Modular Dropout Systems

7.1 Removing the Modular Rear Dropouts

Procedure for removing modular rear dropouts from G-160, T-130-C, T-130, T-129.

7.2 Re-assembling the Modular Rear Dropouts

Process for re-assembling modular rear dropouts onto the swinging arm.

7.1.3 Rear Derailleur Adjustment

How to adjust the rear derailleur for proper chain clearance on the swingarm.

8.0 Whyte Inter Grip Seat Clamp Service

9.0 Internal Cables & Hoses

9.1 Replacing Cable or Hose Outers

Instructions for replacing outer cables and brake hoses within the bike frame.

9.2 Fitting a Dropper Seat-post with Internal Hose

Guide to installing a dropper seat-post with internal hose routing.

10.0 Torque Settings

11.0 Owner's Notes