Need help?Do you have a question about the Whyte 801 and is the answer not in the manual?
General| Wheel Size | 27.5 inches |
|---|---|
| Number of Gears | 10 |
| Chain | KMC X10 |
| Headset | FSA No.10 |
| Saddle | Whyte Custom |
| Frame Material | 6061 Alloy |
| Brakes | Tektro HD-M275 hydraulic disc |
| Frame | 6061 Alloy |
| Shifters | Shimano Deore |
| Rear Derailleur | Shimano Deore |
| Crankset | Shimano |
| Bottom Bracket | Shimano |
| Handlebars | Whyte 6061 Alloy |
| Stem | Whyte Alloy |
| Seatpost | Whyte Alloy |
| Wheelset | Whyte Alloy |
Details on the geometry specifications for Whyte 19 Trail Alloy, Titanium, and Steel models.
Geometry specifications for Whyte 19 C, CS, Race, and Works models.
Geometry specifications for Whyte 801, 805, and 809 models.
Geometry specifications for Whyte 901 and 905 models.
Guidance on making adjustments to Whyte bike components, referencing manufacturer resources.
Information on the Getta-Grip seat clamp, covering its design and adjustment.
Instructions for setting up the front fork, including sag adjustment and rebound damping.
Overview of the Whyte 19 Trail adjustable dropout system for chain stay length adjustment.
Detailed steps for adjusting the Whyte 19 Trail dropout system to tune handling.
Advisory notes on safe use, maximum rider weight, and component wear for Whyte bikes.
Lubrication details for the Getta-Grip seat clamp, covering bolt-up and QR styles.
Lubrication points and intervals for the Whyte 19 Trail adjustable dropout system.
General lubrication guidelines for Whyte hardtail MTB components, referencing manufacturer data.
To Next Page
