Need help?Do you have a question about the Wi-Tek WI-CPE111-Kit and is the answer not in the manual?
Details the meaning of Power, Ethernet, and Signal LEDs for device status monitoring.
Explains the channel display, AP/CPE mode indicator, dial key, and button functions.
Provides guidance on finding the IP address and initial setup for the 2.4G band.
Provides guidance on finding the IP address and initial setup for the 5.8G band.
Illustrates the connection diagram for the POE adapter and wireless bridge.
Step-by-step instructions for mounting the device and connecting cables.
Guides on configuring one device as AP and another as CPE for PTP connection.
Illustrates the setup for connecting one AP to multiple CPEs.
Connect to LAN, use Discovery Tool, configure PC IP address.
Access the device via web browser using its IP address and log in.
Configure digital settings, network mode, IP address, and DHCP settings.
Modify wireless interface, SSID, security, and channel parameters.
A form for recording purchase details and warranty claims.
Information regarding the proper disposal of the electronic equipment.
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Range | 2.4GHz |
| Wireless Security | 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
| Modulation | DSSS, OFDM |
| Ports/Interface | 1 x 10/100 Mbps Ethernet Port |
| Antenna Type | Built-in directional antenna |
| Operating Temperature | -30°C to 70°C |
To Next Page
