5
SAFETY WARNINGS FOR BATTERY CELLS INSIDE THE TOOL
a) Do not dismantle, open or shred cells.
b) Do not short-circuit charging terminal. Do not store power tool haphazardly in a box or drawer where
charging terminal may short-circuit each other or be short-circuited by conductive materials. When
power tool is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a connection from one charging terminal to another.
c) Do not expose power tool to heat or re. Avoid storage in direct sunlight.
d) Do not subject power tool to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If
contact has been made, wash the affected area with copious amounts of water and seek medical advice.
f) Seek medical advice immediately if a cell has been swallowed.
g) Keep power tool clean and dry.
h) Wipe the charging terminals with a clean dry cloth if they become dirty.
i) Power tool needs to be charged before use. Always refer to this instruction and use the correct charging
procedure.
j) Do not maintain power tool on charge when not in use.
k) After extended periods of storage, it may be necessary to charge and discharge the power tool several
times to obtain maximum performance.
l) Battery gives its best performance when it is operated at normal room temperature (20 °C ± 5 °C).
m) When disposing of cells, keep cells of different electrochemical systems separate from each other.
n) Recharge only with the charger specied by manufacturer. Do not use any charger other than that
specically provided for use with the equipment. A charger that is suitable for one type of battery may
create a risk of re when used with another battery.
o) Keep power tool out of the reach of children.
p) Retain the original product literature for future reference.
q) Dispose of properly.
r) Do not mix cells of different manufacture, capacity, size or type within a device.
s) Do not use any cell which is not designed for use with the equipment.
To Next Page
Loading...