Need help?Do you have a question about the Wickes PDH32DS.2 and is the answer not in the manual?
Keep work area clean, avoid explosive atmospheres, and keep children away during operation.
Ensure proper grounding, avoid wet conditions, and use appropriate extension cords.
Stay alert, use PPE, prevent unintentional starts, and dress appropriately.
Use the correct tool, maintain it, and disconnect power before adjustments.
Wear ear protectors to prevent hearing loss from noise exposure.
Use auxiliary handles for better control and to prevent injury.
Always wear a dust mask to protect against dust inhalation.
Hold tool by insulated surfaces to avoid electric shock from hidden wiring.
For hammer drilling in concrete, brick, stone, and light chiseling.
Guide for fitting and removing bits using the chuck and locking sleeve.
Instructions for attaching and positioning the auxiliary handle.
Explains the function of the anti-vibration handle for enhanced comfort.
How to use the depth gauge to set a consistent drilling depth.
Procedure for operating the on/off switch to start and stop the tool.
Steps to configure the tool for hammer drilling into masonry.
Steps to configure the tool for drilling without the hammer function.
Steps to configure the tool for chiseling without rotation.
Instructions for fitting the dust cover before drilling operations.
Guidance on refilling the gearbox with grease to maintain hammer efficiency.
Explanation of the safety clutch activation during jamming events.
How to adjust the tool's speed using the thumb-wheel.
General| Brand | Wickes |
|---|---|
| Model | PDH32DS.2 |
| Category | Rotary Hammer |
| Language | English |
To Next Page