Need help?Do you have a question about the Widex MOMENT WPC101 and is the answer not in the manual?
General| Type | Receiver-In-Canal (RIC) |
|---|---|
| Technology | Digital |
| Channels | Up to 15 |
| Bluetooth | Yes |
| Water Resistance | IP68 |
| Noise Reduction | Yes |
| Feedback Cancellation | Yes |
| Battery Life | Up to 24 hours |
| Directional Microphones | Yes |
| Tinnitus Masker | Yes |
| Battery Type | Rechargeable |
| Wireless Connectivity | Yes |
Essential precautions for safe handling and operation of the charger and hearing aids.
Introduction to the charger, its purpose, and a note on design variations.
Details on the charger's parts, including charging units, maintenance compartment, and indicator lights.
Specifies temperature and humidity for proper charger operation.
Defines temperature, humidity, and pressure limits for storage and transport.
Instructions for connecting the charger to a power source using the provided cable and adapter.
Describes how the charger indicates it's ready for use after power connection.
Guide on correctly inserting hearing aids into the charger for optimal charging.
Explains the solid yellow indicator during hearing aid detection and the start of charging.
Details on indicator lights (flashing green, glowing green, solid green) for battery charge levels.
Safe procedure for removing hearing aids from the charger and handling potential warmth.
How the maintenance cycle starts and is indicated by a flashing white light.
Indicates end of cycle (solid white) and pausing (solid yellow).
Summarizes indicator lights for charging: yellow (detecting), green (charging), red (error).
Summarizes indicator lights for maintenance: white (in progress/complete), yellow (paused), red (error).
Instructions for cleaning the charger, charging wells, and removing earwax safely.
Solutions for no lights or hearing aids not placed correctly.
Addresses charging pauses due to high temperature and suggests solutions.
Explains causes and solutions for red flashing indicators (charger/hearing aid errors).
Specifies the charger's purpose: charging WIDEX MOMENT™ MRR2D hearing aids.
Declares compliance with Directive 2014/53/EU and provides radio transmitter details.
Covers FCC compliance rules, conditions, and limits for digital devices.
Provides measures for interference correction and outlines Canadian ISED compliance.
Explains standard symbols used in medical device labelling like Manufacturer, Catalogue Number, Consult Instructions.
Details marks such as CE, RCM, FCC logo, and Medical Device indication.
Lists EMC/EMI standards complied with by the product, including FCC and IEC.
States compliance with ISED RF radiation exposure limits for uncontrolled environments.
To Next Page