widos 5500 CNC 3.0 - Page 5

Kunststoffschweißtechnik
Contents
19.09.11 Working Instructions WIDOS 5500 CNC 3.0 Page 5 of 78
5.2. Replacing the Reduction Inserts 22
5.2.1. Using Small and Large Reduction Inserts 22
5.3. Connection with the Basic Machine 23
5.4. Operation with Emergency Power Supply 23
5.5. Automatic Heating Element (optional) 24
5.6. Description of the Display 25
5.7. Accessories for Reading the Data in and out 25
5.7.1. Legitimacy Cards 25
5.7.2. SD-card and drive 26
5.7.3. Barcode 26
5.7.4. Read out WICON with USB card reader (option) 26
5.8. Switching the CNC 3.0 on 27
5.9. Programming and welding with gas legitimacy card 28
5.10. Programming and welding with general legitimacy card or ISO legitimacy card 28
5.10.1. Setting the Pipe Data 29
5.11. Welding Process 30
5.11.1. Welding process with traceability 35
5.12. Error Messages 36
5.13. Administration of the Welding Data 36
5.14. More adjustemends 37
5.14.1. Setting the time and the date 37
5.14.2. Setting the language 38
5.14.3. Setting information of traceability and lenght of pipe 38
5.14.4. Setting of shortened cooling time 39
5.15. Administration of the welding data 40
5.15.1. Copying internal data onto SD-card and deleting them (RAM) 40
5.15.2. Storing data on the SD - card 41
6. DIAGNOSIS PROGRAM 43
7. EQUIPMENT CARE / MAINTENANCE / REPAIR 45
7.1. Storage 45
7.2. Cleaning the Machine 45
7.3. Clamping Elements 45
7.4. Checking the Hydraulic Oil Level 45
7.5. Venting the Hydraulic Cylinders 46
7.6. Maintenance, Inspection and Repair 47
7.7. Saving the Welding Data 47
7.8. Error signals 48
7.9. Possible defects and their elimination 49
7.10. Fuse for Overload Safety Device / Printer Plug Box 50
7.11. Disposal 50
8. TRANSPORT 51