Do you have a question about the Wieland SP-COP2-EN and is the answer not in the manual?
Product type | I/O Module |
---|---|
Manufacturer | Wieland |
Model | SP-COP2-EN |
Communication Interface | Ethernet |
Number of Digital Inputs | 8 |
Number of Digital Outputs | 8 |
Input Voltage | 24 V DC |
Output Voltage | 24 V DC |
Protection Class | IP20 |
Operating Temperature | -25 to 60 °C |
Defines required personnel and lists standards/applications the system complies with.
Outlines operational conditions, general safety guidelines, and protective measures.
Introduces the SP-COP1 module, its description, versions, and interface details.
Introduces the SP-COP2-EN module, its description, versions, and interface details.
Details the SP-COP2-ENI module, its description, and interface functionalities.
Introduces the SP-SDIO module, its description, short-circuit detection, and interface details.
Describes the SP-SDI module, its description, short-circuit detection, and interface details.
Introduces the SP-DIO module, its description, refresh rate, input selection, and interface details.
Highlights crucial configuration aspects, loss of function warnings, and input protection.
Describes connections for emergency stop buttons and various safety switches.
Describes connections for magnetic and inductive safety sensors.
Covers installation and connection of Type 2 and Type 4 light barriers.
Explains connections for ESPE devices and important considerations for safety outputs.
Outlines essential standards and safety precautions for wiring.
Contains critical warnings regarding power, standards, and circuit protection.
Stresses re-validating safety functions after any configuration modifications.
Mandates testing and documentation by a qualified professional before operation.
Lists test points for final system acceptance and operational release.
Guides on actions to take when system errors occur.
Details error codes, LED behavior, and troubleshooting for COMPACT modules.
Presents safety integrity levels and performance categories for outputs.