Need help?Do you have a question about the Wieland SP-COP2-ENI and is the answer not in the manual?
General| Model | SP-COP2-ENI |
|---|---|
| Manufacturer | Wieland |
| Number of digital inputs | 0 |
| Number of digital outputs | 0 |
| Number of analogue inputs | 0 |
| Number of analogue outputs | 0 |
| Rated operating voltage Ue | 24 V DC |
| Type of voltage | DC |
| Degree of protection (IP) | IP20 |
| Ethernet | Yes |
| Communication Interface | EtherNet/IP |
| Number of I/O Points | 0 |
| Input Voltage | 24 V DC |
| Protection Class | III |
Defines the qualifications required for personnel installing and maintaining the samosPRO safety control.
Outlines the conditions and limitations for operating the samosPRO safety control.
Provides essential safety guidelines, standards, and regulations for using the samosPRO safety control.
Details the description, display elements, interfaces, and internal circuits of the SP-COP1 module.
Explains the description, display elements, interfaces, and internal circuits of the SP-COP2-EN module.
Describes the SP-COP2-ENI module, including its functionality and gateway features.
Covers essential safety standards and general requirements for the electrical installation of the samosPRO system.
Describes the process and test points for total acceptance inspection before system operation.
Outlines the tests required to confirm safety requirements before the initial commissioning of the system.
Provides guidance on actions to take when an unclear error occurs in the samosPRO system.
Explains different error levels (configuration, repairable, critical) and their indications.
Details error codes, causes, and measures for eliminating errors using LEDs and messages.
Covers the procedures and frequency for regular testing of safety equipment by qualified personnel.
Provides safety measures and procedures for replacing samosPRO modules.
To Next Page
