Need help?Do you have a question about the WIKA BNA and is the answer not in the manual?
General| Operating Voltage | 24 VDC |
|---|---|
| Touch Type | Resistive |
| Communication Interface | RS-485, Ethernet |
| Protection Class | IP65 |
| Storage Temperature | -20 °C to +70 °C |
Explains the working principle of the bypass level indicator.
Details how to check the delivered items against the delivery note.
Defines DANGER, WARNING, and CAUTION symbols used in the manual.
Specifies the intended application and limitations for the bypass level indicator.
Defines what constitutes improper use and its potential consequences.
Outlines the operator's responsibilities for safe operation and compliance.
Describes the necessary qualifications for personnel performing tasks.
Details the requirements for personal protective equipment during operation.
Explains the product labels and safety markings for identification and safety.
Instructions for checking the instrument for transport damage.
Guidelines for keeping the instrument in its packaging until commissioning.
Steps to prepare the instrument before mounting and installation.
Procedure for initializing the magnetic display and switches.
Instructions and considerations for the physical mounting of the instrument.
Detailed steps for installing the float within the bypass chamber.
Step-by-step guide for putting the bypass level indicator into operation.
Information specific to the version with a heating jacket.
Information on routine maintenance and inspection requirements.
Procedures and precautions for cleaning the instrument.
Steps for safely disconnecting and removing the instrument.
Instructions for washing or cleaning before returning the instrument.
Guidance on environmentally compatible disposal of components.
To Next Page