Wiko PULP - Network Connectivity; Enabling Data Connection

• Enabling Data Connection
To check your data connection settings:
1. Go to Settings > Wireless & networks > More > Mobile
networks > SIM 1 or SIM 2 > Access Point Names, then
enable the access point according to your operator/
package.
2.

by clicking on
.
3. You can choose with which SIM card you will enable
data connection in Settings > Wireless & network > SIM
cards > Preferred SIM for > Mobile data, then press on
the SIM card you want to activate.
When you activate Data Connection for one SIM card,
the 4G network can only be activated for this SIM card.
• Data Roaming
Note that for roaming SIM cards, you must enable the
data roaming in the Settings > Wireless & networks
> More > Mobile networks > SIM 1 or SIM 2 > Activate
Data roaming. Otherwise, the internet connection will be
disabled by default.