EasyManua.ls Logo

Wiko PULP - Operational Safety and Maintenance

Wiko PULP
292 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11. Electric shock: Do not try to dismantle your phone
as there is a very real risk of electric shock.
12. Maintenance: If you want to clean your handset,
use a dry cloth (do not use a solvent, such as benzene,
or alcohol).
13. Recharge your phone in a well ventilated area.
Do not recharge your device when it is resting on a
soft surface.
14. Damage to magnetic strips: Keep your phone away
from credit cards as they may damage the data on the
magnetic strips.
15. Do not use the mobile phone in an environment
at too high or too low temperature, never expose
the mobile phone under strong sunshine or too wet
environment. The suitable temperature for the phone
is -10°c to +45°c, the maximum charging temperature
declared by the manufacturer is +40°c.
16. Due to the used enclosure material, the GSM
mobile phone shall only be connected to a USB
Interface of version 2.0 or higher. The connection to
so called power USB is prohibited.
17. The power adapter is the disconnect device for
this equipment. The socket-outlet shall be near the
equipment and easily accessible.
18. This charger is for indoor use only, the charger
type is:
AREA COUNTRIES CHARGER TYPE
Area 1
France, Germany, Italy,
Portugal, Spain, Belgium,
Netherland, Switzerland,
Luxembourg, Poland,
Algeria, Croatia, Serbia,
Slovenia
TN-050100E4, output
voltage/current is
5.0V/1.0A
Area 2
UAE, Saudi Arabia,
Nigeria, Kenya
TN-050100B4, output
voltage/current is
5.0V/1.0A

Table of Contents

Related product manuals