Tips for Reducing Exposure Levels
We recommend that you use your phone in good reception
conditions in order to reduce the amount of radiation received.
It is advisable to limit the amount of time you use the phone in
underground car parks and when travelling by car or train, etc.
Reception conditions are indicated by the bars that are
displayed on your phone: the more bars there are, the
better the reception quality.
We recommend that you use the hands-free kit to reduce
exposure to radiation.
To reduce the adverse effects of prolonged radiation
exposure, we advise teenagers to hold the phone away
from their lower abdomen, and that pregnant women hold
the phone at a distance from their stomach.
13. Only qualified service personnel should repair your
device. If you give your device to non-qualified personnel
for repair, the phone will not be covered by WIKO’s warranty.
14. The IMEI code is the serial number used to identify your
device and for After-Sales support. There are several ways
of finding your IMEI code:
• Type * # 06 # on your mobile telephone’s keypad.
• Refer to the packaging box that your telephone came in.
• Remove the battery from your device: on the back, you will
see a label with your IMEI code. (For non-removable batteries,
refer to the IMEI engraved on the telephone’s rear casing).
~ Radio frequencies Band information
WWAN
Frequency Band Maximum output power (dBm)
GSM 1800/1900 31,00
GSM 850/900 33,50
UMTS B1/B2/B5/B8 24,00
FDD LTE B1/B3/B5/B8/B20/B28 24,00
FDD LTE B7 23,50
TDD LTE B40 24,00
WLAN
Standard Frequency EIRP (dBm)
802.11b 2.4~2.4835GHz 17,70
802.11g 2.4~2.4835GHz 16,50
802.11n 2.4~2.4835GHz 16,37
802.11n
5.15~5.25GHz 14,23
5.25~5.35GHz 14,14
5.47~5.725GHz 13,60
5.725~5.825GHz 13,43
802.11a
5.15~5.25GHz 14,21
5.25~5.35GHz 13,85
5.47~5.725GHz 13,80
5.725~5.825GHz 13,34
802.11ac
5.15~5.25GHz 14,17
5.25~5.35GHz 13,99
5.47~5.725GHz 14,08
5.725~5.825GHz 13,47
BLUETOOTH
Bluetooth Version EIRP Power (dBm)
EDR 11,62
LE -0,54
To Next Page
Loading...
