Wilderness Systems, 575 Mauldin Road, Suite 200, Greenville, SC 29607 Rev. 06/17#59504276
16. While still holding looped bungee in place, push riser along with the buckle-ended strap up into seat back
spine. This should lock the 3/16 looped bungee into the U-shaped slot on seat back spine.
17. Once riser is locked into place, pull straps and bungee with hooks outside of the large opening of the seat back spine.
18. Riser should function and spring back and forth once complete.
19. Attach the seat back pad to the seatback by hooking the webbing on bottom of seat back pad on notch at
bottom of seat back as shown.
To Previous Page
