Need help?Do you have a question about the Wildfire LT-400F1 and is the answer not in the manual?
General| Model | LT-400F1 |
|---|---|
| Category | Light Fixture |
| Wattage | 400W |
| Voltage | 100-240V AC |
| IP Rating | IP65 |
| Weight | 8.5kg |
| Material | Aluminum |
| Lifespan | 50000 hours |
| Certification | CE, RoHS |
| Type | LED |
Includes UV exposure, heat hazards, and electrical risks.
Covers photosensitive individuals and mercury lamp disposal.
Electronic ballast features, power factor, and voltage/current ratings.
Details on lamp type, beam angle, reflector material, and peak transmission.
Physical specs and list of standard/optional accessories.
Steps for unpacking and checking the fixture for damage.
Mounting the fixture using yoke, pipe clamp, or baby bail block.
Powering on, lamp striking, and auto-protection features.
Setting DMX address (001-512/702) and controlling via data values.
Monitoring lamp hours and dimming the display.
Step-by-step instructions for safely replacing the fixture lamp.
Recommended methods for cleaning the reflector, lamp, and lens.
Diagnosing and fixing problems like lamp failure or no DMX signal.
Detailed measurements of the fixture's height, width, and depth.
Visual representation of parts for identification and assembly.
Detailed listing of parts for ordering or replacement.
Diagram showing power input, ballast, lamp, and DMX connections.
Diagram detailing electrical connections, including transformer.
Graph showing light transmission percentages across wavelengths.
Table detailing beam spread and intensity at different distances.
Details on what the warranty covers and exclusions.
Steps for notifying Wildfire and returning products for service.
To Next Page