Step: 13: Using a Stud Finder locate and mark at least 3 studs in the wall behind the
bed cabinet. Pre drill with a 1/4” drill bit through the Anchor Support Board at the
back of the Bridge Board corresponding with the studs in your wall. Using the 3
1/2” wood screws provided anchor the bed cabinet to the wall through the pre drilled
holes.
IMPORTANT! Bed cabinet requires 3
studs, It is VERY important that the bed
cabinet be anchored securely to the wall.
For technical support call 866-877-7803
toll free.
Hardware needed for next step
3.5” Wood Screws
x 3
Page 9
WARNING! THE NEXT STEP MAY REQUIRE PROFESSIONAL HELP.
IF YOUR WALLS ARE NOT TRADITIONAL WOOD FRAMING, YOU MAY NEED TO HIRE A HANDY
MAN OR CONTRACTOR TO HELP IN ANCHORING THE BED TO YOUR WALL. FAILURE TO PROP-
ERLY ANCHOR CABINET COULD CAUSE SEVERE PERSONAL INJURY. CALL TECHNICAL SUP-
PORT AT 866-725-6401 IF YOU HAVE ANY QUESTIONS.
3.5” Wood Screw
Pre-drill 1/4” hole
through the Anchor Sup
-
port board corresponding
with wall studs
Studs in wall
Stud
To Next Page
Loading...