Wilding Wallbeds User Manual

Side Mount
Revision 7/13 BK22
INSTRUCTION BOOKLET #22
WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE
TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS
COULD RESULT IN SEVERE PERSONAL INJURY TO USER OR DAMAGE TO PRODUCT.
PLEASE CONTACT CUSTOMER SERVICE AT 866-725-6401 FOR ANY QUESTIONS.

Wilding Wallbeds Specifications

General

Brand	Wilding
Model	Wallbeds
Category	Indoor Furnishing
Language	English

Summary

Installation Overview and Safety

Product Identification

Identifies the product as a Wilding Wallbeds Side Mount Instruction Booklet #22.

Critical Safety Warning

Warns of stored energy and potential severe injury if instructions are not followed.

Installation Preparation

Tools Required

Lists all necessary tools for the wallbed installation process.

Hardware Components

Details all hardware items, quantities, and categorizations for assembly.

Wallbed Assembly Procedure

Lift Mechanism and Side Board Assembly

Covers installing springs, lift mechanisms, connecting bolts, and cam fittings to side boards.

Bridge Board and Support Installation

Details attaching the bridge board, front bridge support, and bridge stiffener.

Wall Anchoring and Frame Assembly

Guides anchoring the unit to the wall and assembling the mattress frame and rails.

Lift Mechanism Finalization

Covers securing lift mechanism tension arms and covers.

Final Adjustments and Finishing

Bed Alignment Check

Instructions for checking and adjusting the bed's alignment when closed.

Handle Installation

Attaching the bed handles to the pre-drilled holes in the center panels.