Wildix W-AIR Base - System architecture

W-AIR Network Admin Guide - Sync over the air
W-AIR Network Admin Guide - Sync over the air
Page 2 of 27
Step 3. Register a W-AIR Handset
Step 4. Set up Repeaters
W-AIR Network deployment
Case 1: Sync chain with one Primary Base
Case 2: Sync chain without alternative sync paths
Case 3. Sync chain with alternative sync paths.
Verify deployment
W-AIR Network auto roaming feature
Call Features
DND, Call forwarding, Paging, Call intrusion, Intercom
Ring tones
Call transfer, hold, call swap, conference call
Upgrade Procedure of W-AIR system
FW upgrade of Base Stations
FW upgrade of Repeaters and Handsets
Repeaters
Handsets
Alarms setting
Types of alarms
Alarm Button
Pull Cord Alarm
Running Alarm
Man Down Alarm
No Movement Alarm
Set up emergency profiles
Assign emergency profile to handsets
Description
System architecture
W-AIR is a Wildix cordless solution. The system supports auto-provisioning enabling instant connection to the
Wildix PBX. Due to high scalability, new components are quickly and easily integrated to guarantee the better
performance.
Wildix W-AIR system uses the wireless technology CAT-iq (Cordless Advanced Technology – Internet quality).
The architecture consists of three components:
1. - an essential component of a DECT system. Wildix W-AIR base stations:Base station
Multicell base stations: W-AIR Base (End Of Life), W-AIR Base Outdoor, W-AIR Base Sync Plus (for sync
over LAN, refer to )W-AIR Network Admin Guide - Sync over LAN
Single Cell base station: W-AIR Base Small Business. Documentation: W-AIR Small Business Admin
Guide
2. - extends the signal coverage of the base station.Repeater
3. :Cordless endpoints