wildkin Fainting Couch - User Manual

Assembly Procedure:
- Prior to assembling each wooden part, liberally apply the Wood Glue from the supplied bottle (o1) to both wooden
parts. After assembly (and before glue dries) wipe off any excess glue. While not absolutely necessary, the glue will
add additional strength to each joint, and is recommended.
* Please note that the shape of your chair back (D)
may be slightly different than the drawing.
Page 1 of 7
P: 866-727-0544 E: customercare@wildkin.com www.wildkin.com
Thank you for purchasing this Fainting Couch! We
know that it will bring you and your little one
years of enjoyment! Please first be sure you have
all the necessary components listed on page 2.
We suggest that you lay them all out on the
carpet before assembling. If for any reason you
think a component may be missing, please
contact our customer service team. Please read
the General Safety Instructions and Assembly
Procedure before beginning assembly.
General Safety Instructions
- Your bench is safety tested for all ages, however it is recommended that caution be used at all times.
- This item is recommended for children up to 100 lbs.
- This item must be assembled by an adult. Please do not leave any spare parts near children.
- CAUTION: Although a safety hinge is installed, be careful when opening and closing the lid to avoid injury to small
children.
Tools You Will Need
- Standard Phillips Head Screwdriver. CAUTION: It is highly recommended that you not use power tools or electric
screwdrivers as screws should not be over-tightened.
Care Instructions:
- We recommend this item be wiped down with a non-bleach wipe. If your toy bench includes cushions, we
recommend that these be dry-cleaned only.
Fainting Couch Assembly Instructions
ADULT ASSEMBLY REQUIRED.
SMALL PARTS AND SHARP POINTS MAY BE PRESENT PRIOR TO ASSEMBLY.
KEEP OUT OF BABY’S REACH.
WARNING:

Summary

General Safety and Preparation

General Safety Instructions

Provides essential safety guidelines for users of the fainting couch.

Tools and Assembly Procedure

Lists required tools and outlines key steps for assembling the couch.

Care Instructions and Warnings

Offers guidance on cleaning and critical safety warnings for assembly.

Fainting Couch Components

Detailed Assembly Steps

Attach Headrest to Toy Box Lid

Connects the headrest (E) to the toy box lid (H) using screws and glue.

Attach Side Boards to Toy Box Lid

Secures the right (B) and left (C) side boards to the toy box lid (H).

Attach Safety Hinge

Installs the safety hinge (I) onto the back board (G) and toy box lid (H).

Attach Back Board

Connects the back board (G) between the right and left side boards.

Attach Front Board

Secures the front board (F) between the right and left side boards.

Attach Bottom Board

Fastens the base board (A) to the main structure of the couch.

Attach Seat Back

Connects the seat back (D) to the toy box lid (H) and headrest (E).

Attach Cushions

Secures the head (L), back (J), and seat (K) cushions to the couch.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document provides assembly instructions for a Wildkin Fainting Couch, a piece of furniture designed for children, which also functions as a toy storage bench.

Function Description:

The Fainting Couch serves as a seating option for children and incorporates a toy storage compartment beneath the seat. The lid of the toy box is equipped with a safety hinge to prevent it from falling unexpectedly, enhancing safety for small children. The couch is designed to be assembled by an adult and is intended for use by children up to 100 lbs.

Important Technical Specifications:

• Weight Limit: Recommended for children up to 100 lbs.
• Assembly Requirement: Adult assembly required.
• Hardware:
  • (s3) 6 Short Machine Screws (1")
  • (s4) 2 Small Machine Screws (1/4")
  • (s5) 2 Small Machine Screws (1/2")
  • (w3) 8 Small Washers (5/8")
  • (w4) 10 Spring Washers (5/8")
  • (01) 1 Wood Glue Bottle
• Components:
  • (A) Base Board
  • (B) Right Side Board
  • (C) Left Side Board
  • (D) Seat Back
  • (E) Headrest
  • (F) Front Board
  • (G) Back Board
  • (H) Toy Box Lid
  • (I) Safety Hinge
  • (J) Back Cushion
  • (K) Seat Cushion
  • (L) Head Cushion
• Safety Feature: Includes a safety hinge for the toy box lid to prevent accidental closing and potential injury.

Usage Features:

• Toy Storage: The primary feature is the integrated toy box, providing convenient storage for children's items.
• Seating: Offers a comfortable seating area with a backrest and cushions.
• Safety: The safety hinge is a critical usage feature, ensuring the lid remains open once lifted, preventing it from falling on a child. Users are cautioned to be careful when opening and closing the lid.
• Assembly Guidance: The manual emphasizes laying out all components on a carpet before assembly and provides detailed, step-by-step instructions with figures to guide the user.
• Glue Application: Wood glue is recommended for all wooden joints to add additional strength, though it is not strictly necessary for assembly.
• Tool Requirement: A standard Phillips Head Screwdriver is required for assembly. Power tools or electric screwdrivers are strongly discouraged to prevent over-tightening of screws.

Maintenance Features:

• Cleaning: The item should be wiped down with a non-bleach wipe.
• Cushion Care: If the toy bench includes cushions, they should be dry-cleaned only.
• Component Replacement: In case of missing components, customers are advised to contact Wildkin's customer service team.
• Safety Hinge Check: Users are reminded that if the safety hinge is not connected to the lid, the lid will fall by itself, posing a danger. Regular checks of the hinge connection are implied for continued safe operation.

wildkin Fainting Couch Specifications

General

Brand	wildkin
Model	Fainting Couch
Category	Indoor Furnishing
Language	English