wildkin Slatted Step Stool

To Next Page

Thank you for purchasing a Levels of Discovery Slatted

Step Stool! To get started, please first be sure you have all

the necessary components. We suggest that you lay them

all out on the carpet before assembling. If for any reason

you think a component may be missing, please contact our

customer service team.

Tools Needed for Assembly:

Allen wrench (included). CAUTION: It is highly recom-

mended that you not use power tools or electric

screwdrivers as screws should not be over-tightened.

General Safety Instructions:

This step stool is recommended for an individual up to

200 lbs.

Care Instructions:

Wipe clean with non-bleach cloth.

Page 1 of 2

P: 866-727-0544 E: customercare@wildkin.com www.wildkin.com

Slatted Step Stool Assembly Instructions

Components

A. 1- Slatted Step B. 1- Left Side Panel

o2. 1- Allen Wrenchs7. 4- Large Screws

C. 1- Right Side Panel

ADULT ASSEMBLY REQUIRED.

SMALL PARTS AND SHARP POINTS MAY BE PRESENT PRIOR TO ASSEMBLY.

KEEP OUT OF BABY’S REACH.

PLASTIC BAGS CAN BE DANGEROUS. TO AVOID DANGER OF SUFFOCATION, KEEP THIS

BAG AWAY FROM BABIES AND CHILDREN.

WARNING:

Need help?

Do you have a question about the wildkin Slatted Step Stool and is the answer not in the manual?

Summary

Assembly Preparation and Safety

General Safety Instructions

Guidance on step stool weight limit and safe usage practices.

Tools and Care Instructions

Details on required tools for assembly and cleaning recommendations.

Critical Safety Warnings

Essential warnings regarding adult assembly, small parts, and plastic bags.

Product Components

Slatted Step

The main seating surface of the step stool.

Side Panels

Includes left and right side panels for stool structure.

Hardware

Includes large screws and an Allen wrench for assembly.

Assembly Steps

Attach Side Panels to Step

Instructions for connecting side panels to the slatted step using screws.

This document provides assembly instructions for the Levels of Discovery Slatted Step Stool, a product designed by Wildkin. The step stool is intended for individual use and has a weight capacity of up to 200 lbs. It is designed for adult assembly, with a focus on safety and proper construction.

Function Description:

The Slatted Step Stool serves as a stable platform to assist individuals in reaching higher places. Its design incorporates slatted surfaces, likely for aesthetic appeal and potentially to reduce overall weight while maintaining structural integrity. The stool is assembled from three main components: a slatted step, a left side panel, and a right side panel, which are securely fastened together using screws.

Important Technical Specifications:

Weight Capacity: The step stool is recommended for an individual up to 200 lbs.
Components:
- A. 1 - Slatted Step
- B. 1 - Left Side Panel
- C. 1 - Right Side Panel
Hardware:
- s7. 4 - Large Screws
- 1. 1 - Allen Wrench (included for assembly)
Assembly Method: The side panels attach to the slatted step using pegs and large screws, which are tightened with an Allen wrench.
Tools Required: Allen wrench (included). Power tools or electric screwdrivers are explicitly not recommended to prevent over-tightening of screws.

Usage Features:

Assembly Process: The assembly process is straightforward, involving aligning holes and pegs, and then securing components with screws.
1. Align holes on the Left Side Panel (B) with pegs on the Slatted Step (A).
2. Insert Large Screws (s7) into the holes on the Left Side Panel (B) and tighten with the provided Allen Wrench (02) until secure. A helpful hint is provided: if screws don't properly engage, check the alignment of the nut sleeves within the Slatted Step (A) and adjust with a screwdriver if necessary.
3. Align holes on the Right Side Panel (C) with pegs on the Slatted Step (A).
4. Insert Large Screws (s7) into the holes on the Right Side Panel (C) and tighten with the Allen Wrench (02) until secure.
Safety Warnings:
- Adult assembly is required.
- Small parts and sharp points may be present prior to assembly; keep out of baby's reach.
- Plastic bags can be dangerous; keep away from babies and children to avoid the danger of suffocation.
Pre-Assembly Recommendation: It is suggested to lay out all components on a carpet before beginning assembly to ensure all parts are present. If any component is missing, customers are advised to contact Wildkin's customer service team.

Maintenance Features:

Care Instructions: The step stool should be wiped clean with a non-bleach cloth. This simple cleaning instruction suggests that the materials used are durable and easy to maintain with standard household cleaning practices.

Additional Information:

Manufacturer: Wildkin (Levels of Discovery)
Contact Information:
- Phone: 866-727-0544
- Email: customercare@wildkin.com
- Website: www.wildkin.com

This step stool is designed to be a practical and safe aid for reaching elevated areas, with clear instructions for assembly and maintenance to ensure its longevity and user safety.