EN
11
Our method to sample the beans is based
on ISO 950 standard and while handling
the samples we follow ISO 7700/1 and
ISO 7700/2 standards. ISO = International
Organization for Standardization.
7. Warranty and the maintenance
All Wile products carry a 12 month
manufacturer warranty for materials and
workmanship. The warranty is valid for 12
months from the date of purchase on the
receipt. To claim the warranty, the
customer should return the defect product
to the Manufacturer, reseller, or the
nearest Wile Service Partner. The
warranty claim must be accompanied by
the description of the fault, copy of sales
receipt and customer's contact
information. The manufacturer / Wile
service partner will repair or replace the
defective product and return it as soon as
possible. The liability of Farmcomp is
limited to the price of the product in
maximum. The warranty does not cover
any damage that is caused by incorrect or
careless use of the product, dropping the
product or damage that is caused by
repairs that are carried out by non-
authorized personnel. Farmcomp does not
accept any responsibility for any direct,
indirect or consequential damages that
are caused by the use of the product or
the fact that the product could not be
used.
The meter can be cleaned with wet or dry
fabric. Do not use any detergents or other
strong cleaning substances. Do not put
any liquids inside the meter. Keep the
meter in warm and dry place.
If you suspect a fault in the meter,
To Next Page
Loading...
