19. Insert the measuring cup into the lid opening.
20. Select the speed by turning the control knob or press the Quick-select button.
Note: Do not let the appliance to operate more than 3 minutes continuously. Let the
appliance to cool down to room temperature before continue operating the appliance.
After using the blender
13． Disconnect the power from main supply.
14． Remove the lid (together with measuring cup) from the jar.
15． Remove the jar (together with blade assembly unit interface) from the motor part.
16． Detach the blade assembly unit interface from the bottom of the jar.
Note: Always clean the removable parts immediately after use.
Note: It is recommended to cut the meat or other food into smaller pieces before putting
them in the jar. Do not operate with large quantities of food at one time.
Cleaning
Always clean the removable parts immediately after use.
Note: Be careful when cleaning the parts. Avoid touching the sharp blades!
13． Disconnect the power from main supply.
14． Disassemble all removable parts before cleaning.
To Next Page
Loading...
