Wilfa E2 - Function Schematic; Control Panel Overview

4. Check the power ON/OFF, when the installation
is completed.
00
2. Slide the handlebar onto the stem.
Make sure it's right way round.
LCD display
Bell
Hook
3
4
1. Function schematic Front light 2. Assembly
T
hrottle
Brake lever
Folding mechanism ______________
1. Unfold the stem and push it until you hear a click.
Then unfold the kickstand to support the scooter.
Rear brake led
Disc brake
Kick stand
Motor
Charging port
When the scooter is off, press the button to turn on the scooter; When the scooter is on, press and hold for five seconds to
turn off the scooter.
The power level is indicated by four power lights on the control panel.
When the scooter is on, press one time turn on/off front light
3. Use the hexagonal wrench in the package
box to lock the screws on both sides.
Control Panel
Power Button
B
attery Indicato
r
Ligh
t