10
EN
INSTRUCTION MANUAL · FOOD PROCESSOR
TROUBLESHOOTING
Problem Solutions
Machine does not
work
- There is a safety interlock switch between base, bowl
and lid. Make sure the bowl and lid are securely
locked into position. It will not start if the lid or/and
bowl are not locked into place.
- If the motor still will not start, check the power cord
and power outlet.
French Fried Potato
Julienne Disk
- Always clear any blocked potato from the disc before
processing more potatoes.
Some food remains
on the disc after
processing
- It is normal for small pieces to remain after
processing.
Motor slows down
when mixing dough
- Amount of dough may exceed maximum capacity.
Remove half and process in two batches.
Dough is too dry - Run machine and add water through feed cube,
1 tablespoon at a time until dough cleans the inside
of the processing bowl.
Dough is too wet - Run machine and add our through feed tube,
1 tablespoon at a time until the dough looks dry
enough.
CLEANING
• Remove the power cord from the socket before cleaning.
• Do not immerse the housing with motor in water.
• Do not use any abrasive detergents.
• Please only use a damp to clean the outside of the housing.
• Components that have come into contact with food can be cleaned in soapy
water.
• Do not use dishwasher.
• To clean it efciently pour hot water and a few drops of soap into the bowl (do
not exceed max line) and press the pulse button to clean the bowl and the
attached accessory.
• Allow the parts to dry thoroughly before reassembling the device.
To Next Page
Loading...