19
Empty and clean the humidier before storage. Clean the humidier before
next use. Use cold boiled water, or distilled water.
• Clean the transducer, water tank and basin every three days.
• Change the water in the water tank more often to keep it fresh.
• Make sure to pour out water from the water tank and dry everything
before storage.
HOW TO CLEAN THE TRANSDUCER
• Clean with clean water of citric acid if there is scale in it.
• Brush off the scale from the surface.
• Rinse the transducer with clean water.
HOW TO CLEAN THE BASIN
• Clean the water basin with a soft cloth or use citric acid if there is scale in
it.
• If the scale covers the security switch, drop some citric acid on it and let it
sit for 2-5 minutes on the scale and clean it with a brush.
• Rinse the water tank with clean water.
HOW TO CLEAN THE CERAMIC FILTER
• Clean and activate the ceramic ball after using 1000L water. Depending on
the water quality. If the ceramic ball is dirty it needs to be cleaned more
frequently.
• It can be dipped into vinegar for 5 minutes, then rinse it with water.
• Put the lter under the sun for 4-6 hours to dry, or overnight.
To Next Page
