EasyManua.ls Logo

Wilfa ICP-2000 - Product Description and Features; Part Description; Performance Features; Suitable Pan Ware

Wilfa ICP-2000
20 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
EnglishEnglish
English
Part Description:
A: Heating Panel
B: Air Outlet
C: Air Inlet
D:Control Panel
Performance Features
1. High efficiency and energy saving, with thermal efficiency higher than 98%. Power saving and rapid
heating.
2. Controlled by high capacity microprocessors and holding the functions of frying, rice cooking, water
boiling, soup cooking, steaming and stewing, milk heating, chafing dish cooking and barbecue cooking.
3. Multiple grades of power and temperature for selection to satisfy your different needs.
4. You can set timing to meet your needs of different circumstances.
5. Multiple protective functions:
No Pan Protection: When the type of pan on the heating panel is not correct or the diameter of the
pan is too small (less than 12cm), the cooker shall enter the status of automatic checking of pan.
Overheating protection function for the heating surface and the inside of cooker.
Over current, over-voltage and low-voltage protection functions.
Automatic shutoff protection functions when there is no manual operation for two hours.
6. Safety and sanitation: it is clean during usage, no open flame, no smoke, and no accident such as
gas leakage, explosion or burn commonly happening at a gas stove, safe and reliable.
7. Adopting hi-tech ceramic microcrystalline panel, which is resistant to high temperatures and easy in
cleaning maintenance.
Suitable Pan Ware
1. Materials: iron, stainless steel, iron cast and heat-resistant glassware with magnetic inductive layer.
2. Form: pan with flat round bottom (the diameter of flat bottom shall be larger than 12cm) or frying pan
with round bottom or special functions.
3. It is better to use matched pan ware specially supplied with the electromagnetic oven, so as to
achieve the best performance.
Unsuitable Pan Ware
1. Materials: Nonferrous metal, ceramics, glass, pan with bottom as copper or aluminum (multi-layer
metal pan).
2. Form: Pan with very uneven bottom, pan with bottom diameter less than 12 centimeters.

Related product manuals