Outlines of Operation
1. Connecting to power supply: Insert the power plug into the power socket of AC230V/10A. When you
hear a “Beep” from the buzzer and the power indicator is on, it means the power is connected and the
oven is in the standby status.
2. Placement of utensils: Put food to be cooked in the pan and then put the loaded pan at the center
position of the heating panel of the electromagnetic cooker.
3. Turning on the heating function: Press the ON/OFF OR POWER switch, the display will show “on”
then push the “menu” button , the power indicator are on, and now the electromagnetic oven is in the
power heating status. The display will show “ 1600” , you can adjust from 200W to 1800W use the wheel
!
4 Push the menu button again the temperature light on, and now cooker is in the temperature heating
status. The display will show “240” , you can adjust from 60 degree to 240 degree sue the wheel .
5 Push the menu button again the power and timer light on together, and now cooker is in the power
timing status. The display will show “0:00” , you can adjust from 0:01 minute to “3:00” hours , after you
order the time , wait for 5 seconds the cooker will back to the power status . the timer is working . then
the display will show the time and power turns. This time you can adjust the power again ,the timer keep
working .
6 Push the menu button again the temperature and timer light on together, and now cooker is in the
temperature timing status. The display will show “0:00”, you can adjust from 0:01 minute to “3:00” hours,
after you order the time , wait for 5 seconds the cooker will back to the temperature status . the timer is
working . then the display will show the time and temperature turns. This time you can adjust the
temperature again, the timer keep working.
8. After usage completed, window of timer will shut down, it means heating has been stopped. But the
cooling fan will keep running for 1 minute to cool down the inner of product. The cooling fan would be
stopped automatically after 1 minute. Then if you want to unplug the power plug, you had better do it
after the cooling fan stopped.
General Precautions
1. Do not place the oven near water, otherwise water may enter the oven and the operating life of the
product may be shortened.
2. The cooker must be away from wall for at least 10cm when the product is used. The air inlet and air
outlet of the oven must be through without obstacle, otherwise blocked air inlet or air outlet may lead to
failure of the cooker.
3. Do not use the oven in places where there are high temperatures, steam, and moisture or gas oven.
4. Do not put metal ware or magnetic articles (such as water, credit card, tape recorder, disk, etc) on the
oven, otherwise the articles may be affected or damaged by the magnetic fields.
5. The oven heats very rapidly, so please first put the food in the pan ware first and then put the loaded
pan ware on the oven. Otherwise the unloaded pan ware may be heated to deform.
6. The pan ware shall be placed at the center of the ceramic panel and the diameter of the pan bottom
shall not be larger than 30cm, otherwise the plastic housing may deform.
7. Do not put the oven on iron plate or iron table for usage.
8. Metallic objects such as knives, forks, spoons and lids should not be placed on the hotplate
Since they can get hot !
9. warning : if the surface is cracked ,switch off the appliance to avoid the possibility of electric shock !
Safety Precautions during the Usage
1. Please use separate and special socket above 15A for the electromagnetic cooker. The oven shall
not share the same socket with any other electrical appliance, otherwise there may be danger arising
from overheating.
To Next Page
Loading...