Wilfa WAC-9000 - Advanced Operating Modes

54
.
.
.
.
Press or to adjust the hour. Press ______ momentarily, the 2 right digits of the 4
digits will flash. Press or to adjust the minutes of the clock. Press the
button for 3 seconds again to activate the clock.
SETTING THE TEMPERATURE
If you want to change the set temperature press the or -button. The 2
digit display will indicate the set temperature. Note: Reaching the set
temperature depends on the room and outdoor climatic conditions.
MODE
Pressing the -button to switch the operating mode between 'cooling' and
'fan only'.
FAN SPEED
If you prefer a constant fan speed instead of the auto fan speed, press the
button successively; the fan speed icon on the LCD-display will rotate
accordingly.
Fast - for the turbo speed
Normal - for the medium speed
Slow - for the slow speed
Auto - alternating fast and slow speed
TIMER
For all of the following TIMER programming, proceed firstly with these
standard steps:
5. Press the --button briefly; the 2 left digits of the 4 digits on the LCD display
are flashing.
6. Press or to adjust the hour.
7. Press the -button briefly again, the 2 right digits of the 4 digits are flashing.
8. Press or to adjust the minutes of the clock in intervals of 5
minutes. The timer is set. After 10 seconds the time display Timer example
returns.