EasyManua.ls Logo

Wilfa WAC-9000 - Remote Control Usage; Dehumidification Function

Wilfa WAC-9000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
.
DEHUMIDIFICATION
If the unit will be used mainly as a dehumidifier just let the warm air return in
the room. Continuous drainage (see separate chapter) is then necessary and
more efficient.
REMOTE CONTROL
The unit responds to all signals that are sent by the remote control. There will be
a beep sound from the unit after receiving the signal. The operation of the unit
by remote control, is almost identical to the operation by the control panel. The
only exception is the clock function. Instead of the -button for setting
the actual time and for programming the timer, there are 3 push buttons on the
remote control as follows:
- for setting the actual time.
TIMER ON - for programming the time when the unit is ON.
TIMER OFF - for programming the time when the unit is OFF.

Related product manuals