EasyManua.ls Logo

Williams WBC10 User Manual

Williams WBC10
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATING & ENGINEERS MANUAL FOR REACH-IN &
MODULAR BLAST CHILLERS, BLAST CHILLER FREEZERS &
BLAST FREEZERS
IMPORTANT INFORMATION (PLEASE RETAIN THIS DOCUMENT)
This Manual covers the installation, operation and routine maintenance requirements for the following
Williams Refrigeration products:
WBC/WBCF10 WMBC/WMBCF90 WMBF100 J1BC WBC40RN
WBC/WBCF20 WMBC/WMBCF120 WMBF200 WBC70
WBC/WBCF30 WMBC/WMBCF160 WTBC70
WBC/WBCF40 WMBC/WMBCF200
WBC/WBCF50 WMBC/WMBCF240
WMBC/WMBCF320
Please read this Manual carefully before connecting the appliance.
Provided the instructions in this Operating Manual are read and implemented correctly, the optimum
performance and reliability of your equipment should be maintained.
We assume the installer, user and service provider are appropriately trained, skilled and competent to
properly and safely carry out the work, and will use the necessary safety equipment, and take the necessary
precautions required of their intended work.
General Regulations
Declaration of Conformity:
Refrigerant Designation Global Warming Potential
HFC - R134a 1430
HFC - R404a 3922
HFC - R452a 2140
Williams Refrigeration declares that all products manufactured by Williams Refrigeration comply with
the above directives applicable to those products, and those products are therefore declared to be in
conformity with the provisions of the above legislation.
Model No.: ...............................................................................
Serial No.: ................................................................................
WWW.WILLIAMS-REFRIGERATION.COM

Other manuals for Williams WBC10

Question and Answer IconNeed help?

Do you have a question about the Williams WBC10 and is the answer not in the manual?

Williams WBC10 Specifications

General IconGeneral
BrandWilliams
ModelWBC10
CategoryChiller
LanguageEnglish

Summary

IMPORTANT INFORMATION

General Regulations Declaration of Conformity

Details regulatory compliance and refrigerant information.

IMPORTANT SAFETY INFORMATION

ELECTRICAL SAFETY

Safety precautions for electrical connections and usage.

TEMPERATURE PARAMETERS

INSTALLATION GUIDELINES

REMOVAL OF REDUNDANT APPLIANCES

Procedures for safely disposing of old refrigeration appliances.

UNPACKING AND INSPECTION

Instructions for unpacking and checking the appliance for damage.

PROTECTIVE COATING REMOVAL

Guidance on removing protective coating from surfaces.

VENTILATION REQUIREMENTS

Requirements for proper airflow and clearance around the unit.

LEVELING APPLIANCE

How to ensure the appliance is level for correct operation.

MAINS ELECTRICAL CONNECTION

Safety considerations for connecting the appliance to the mains.

CONNECTION TO A MAIN DRAIN

How to connect condensate drains for specific models.

ADJUSTABLE TROLLEY GUIDES

Instructions for fitting trolley guides on the WTBC70 model.

SHELF/SLIDE FITTING

Guide on how to fit shelves and slides within the cabinet.

LOADING AND SHELF DISTRIBUTION

Best practices for loading food and distributing shelves.

STORAGE TIMES

Recommended storage durations for chilled and frozen foods.

CONTROLLER OPERATION

CONTROLLER AND DISPLAY

Overview of the controller display and its functions.

PRINCIPLES OF OPERATION

Explains how the blast chillers/freezers operate to reduce food temperature.

BLAST CHILLER/FREEZER OPERATION MODES

Describes the initial standby mode and basic operation of units.

STORE MODE OPERATION

Information on how the controller operates during storage mode.

BLAST CHILL OR FREEZE PROGRAMMING

Step-by-step guide to programming blast chill and freeze cycles.

CONTINUOUS BLAST FUNCTION

Explanation of continuous blast function and probe LED indicators.

DEFROST CYCLES

Details automatic and manual defrost cycles and their indications.

ALARM CODES AND TROUBLESHOOTING

Explains audible and visual alarms, fault codes, and troubleshooting.

AIRFLOW CONSIDERATIONS

Importance of correct airflow for efficient chilling cycles.

COMPLEMENTARY COMPRESSOR CONTROL

Explains compressor rest time and duty cycle functions.

HIGH/LOW PRESSURE CONTROL

Details the HP/LP control system and associated alarms.

THERMOSTATS AND PROBES

Information on thermostats, set points, hysteresis, and probe types.

MISCELLANEOUS CONTROLLER FUNCTIONS

Covers condenser cleaning, timer parameters, and notifications.

DISPLAY SLOW DOWN FEATURE

Explains the "display slow down" feature to prevent rapid temperature fluctuations.

APPLIANCE ROUTINE MAINTENANCE AND CLEANING

ROUTINE MAINTENANCE PROCEDURES

Recommendations for preventative maintenance and sealant checks.

CLEANING GUIDELINES

Safe cleaning procedures, including types of cleaners to avoid and use.

SHELF AND RACKING REMOVAL

Step-by-step guide to removing shelves and supports.

REMOVING THE UNIT COVER

Instructions for safely removing the unit cover.

GASKET CLEANING AND REPLACEMENT

How to clean and replace door gaskets for efficiency.

CONDENSER CLEANING

Maintenance for air-cooled units, including cleaning the condenser.

EVAPORATOR AND DRAINLINE INSPECTION

Importance of inspecting the drain hole to ensure it is not blocked.

BREAKDOWN PROCEDURES

What to do in case of a breakdown and who to contact.

SPARE PARTS INFORMATION

CHOOSING GENUINE SPARE PARTS

Guidance on selecting and ordering genuine spare parts for the appliance.

WARRANTY POLICY

PARTS AND LABOUR WARRANTY (UK ONLY)

Details the terms and conditions of the UK parts and labour warranty.

WARRANTY TERMS AND PRODUCTS COVERED

Lists equipment covered by 24-month and 12-month warranties.

CLAIMS PROCEDURE

Outlines the steps for making a warranty claim.

EXCEPTIONS TO STANDARD WARRANTIES

Specifies exclusions and conditions that may affect warranty coverage.

EXTENDED WARRANTY OPTIONS

Information on purchasing and maintaining extended warranty coverage.

Related product manuals