To Next PageTo Next Page
Need help?Do you have a question about the Williams WBC30 and is the answer not in the manual?
Statement of compliance with applicable directives.
Guidelines for safe electrical connection, isolation, and protection.
Covers removal of old appliances, unpacking, and protective coating.
Details necessary airflow and clearance for proper operation.
Ensures correct appliance placement for self-closing doors and drainage.
Specifies electrical connection requirements and safety precautions.
Instructions for connecting condensate drain pipes where required.
Guidance on fitting adjustable trolley guides for specific models.
Instructions for fitting shelves and slide mechanisms within the cabinet.
Guidance on optimal food placement for efficient chilling/freezing.
Recommended storage times and temperatures for chilled and frozen foods.
Overview of the controller interface and initial setup.
Explains basic and combination modes for chillers and freezers.
Describes the function and display during normal storage mode.
Step-by-step guide for setting blast chill or freeze cycles.
How to cancel selections or a running blast cycle.
Explanation of continuous blast mode and probe status indication.
Automatic defrost initiation and operation after cycles.
Identifies common alarms, fault codes, and troubleshooting indicators.
Importance of correct airflow for efficient chilling cycles.
Details rest time, duty cycle, and pressure control for compressor longevity.
Explains how thermostats and various probes are used for control.
Covers condenser cleaning alerts and related indicators.
How display fluctuations are managed for better readability.
Recommendations for annual checks and sealant integrity.
Guidance on using appropriate cleaning agents and methods for surfaces.
Specific instructions for cleaning stainless steel to maintain finish.
Steps for removing shelves and supports for cleaning.
Instructions for accessing internal components and maintaining door gaskets.
Procedure for cleaning the condenser on air-cooled units.
Importance of checking and clearing drain holes.
What to do in case of equipment breakdown and who to contact.
Details the UK-specific warranty terms, coverage, and duration.
Steps to follow when making a warranty claim.
Lists conditions and locations excluded from standard warranty coverage.
Lists specific reasons or conditions under which warranty claims may be denied.
Information on purchasing additional warranty coverage.
General