Williams J1BC User Manual

OPERATING & ENGINEERS MANUAL FOR REACH-IN &
MODULAR BLAST CHILLERS, BLAST CHILLER FREEZERS &
BLAST FREEZERS
IMPORTANT INFORMATION (PLEASE RETAIN THIS DOCUMENT)
This Manual covers the installation, operation and routine maintenance requirements for the following
Williams Refrigeration products:
WBC/WBCF10 WMBC/WMBCF90 WMBF100 J1BC WBC40RN
WBC/WBCF20 WMBC/WMBCF120 WMBF200 WBC70
WBC/WBCF30 WMBC/WMBCF160 WTBC70
WBC/WBCF40 WMBC/WMBCF200
WBC/WBCF50 WMBC/WMBCF240
WMBC/WMBCF320
Please read this Manual carefully before connecting the appliance.
Provided the instructions in this Operating Manual are read and implemented correctly, the optimum
performance and reliability of your equipment should be maintained.
We assume the installer, user and service provider are appropriately trained, skilled and competent to
properly and safely carry out the work, and will use the necessary safety equipment, and take the necessary
precautions required of their intended work.
General Regulations
Declaration of Conformity:
Refrigerant Designation Global Warming Potential
HFC - R134a 1430
HFC - R404a 3922
HFC - R452a 2140
Williams Refrigeration declares that all products manufactured by Williams Refrigeration comply with
the above directives applicable to those products, and those products are therefore declared to be in
conformity with the provisions of the above legislation.
Model No.: ...............................................................................
Serial No.: ................................................................................
WWW.WILLIAMS-REFRIGERATION.COM

Williams J1BC Specifications

General

Brand	Williams
Model	J1BC
Category	Chiller
Language	English

Summary

OPERATING AND ENGINEERS MANUAL

IMPORTANT INFORMATION

Key information to retain for installation, operation, and routine maintenance requirements.

DECLARATION OF CONFORMITY

Compliance statements regarding directives and refrigerant designation/GWP.

IMPORTANT SAFETY INFORMATION

ELECTRICAL SAFETY PRECAUTIONS

Precautions for electrical connection, isolation, protection, and cord replacement.

TEMPERATURE PARAMETERS

INSTALLATION PROCEDURES

APPLIANCE UNPACKING AND PREPARATION

Instructions for removing old appliances, unpacking, and preparing the unit.

SITE AND UTILITY REQUIREMENTS

Details ventilation needs, levelling, and mains connection considerations.

INSTALLATION PROCEDURES

DRAINAGE, LEVELING AND ACCESSORIES

Connecting to main drain and fitting trolley guides for WTBC70 models.

INSTALLATION PROCEDURES

SHELF FITTING AND LOADING PROCEDURES

Guide to shelf installation and optimal food loading for efficient chilling.

FOOD STORAGE TIME GUIDELINES

Recommended storage times for chilled and frozen foods to maintain quality.

CONTROLLER OPERATION

CONTROLLER DISPLAY AND BASIC MODES

Overview of the controller display, standby mode, and basic operational modes.

PRINCIPLES OF BLAST CHILLER OPERATION

Explanation of how blast chillers reduce food temperature effectively and safely.

CONTROLLER OPERATION

BLAST CHILL AND FREEZE PROGRAMMING

Step-by-step guide for programming blast chill, hard chill, and freeze cycles.

CONTROLLER OPERATION

ALARM AND FAULT CODE INTERPRETATION

Explanation of alarm indicators, fault codes, and probe error reporting.

CONTROLLER OPERATION

AIRFLOW AND COMPRESSOR CONTROL SYSTEMS

Details on airflow, compressor rest time, duty cycle, and pressure controls.

THERMOSTATS, PROBES AND MISCELLANEOUS FUNCTIONS

Information on thermostats, probes, condenser cleaning, and other functions.

CONTROLLER OPERATION

DISPLAY SLOW DOWN FUNCTIONALITY

Explanation of the 'display slow down' feature to manage temperature fluctuations.

ROUTINE MAINTENANCE AND CLEANING

GENERAL CLEANING AND MAINTENANCE ADVICE

Guidance on routine checks, sealant, general cleaning, and suitable cleaning agents.

SPECIALIST CLEANERS FOR STAINLESS STEEL

Recommendations for specialized cleaners for non-food contact stainless steel surfaces.

ROUTINE MAINTENANCE AND CLEANING

COMPONENT MAINTENANCE AND REPLACEMENT

Instructions for shelf removal, unit cover, gaskets, condenser, and drain maintenance.

BREAKDOWN PROCEDURES AND SUPPORT

Guidance on contacting service providers in case of equipment breakdown.

ENERGY INFORMATION

MODEL SPECIFIC ENERGY DATA

Energy consumption and refrigerant details for WBCF10, WBCF20, and WBCF30 models.

ENERGY INFORMATION

MODEL SPECIFIC ENERGY DATA

Energy consumption and refrigerant details for WBCF40, WBCF50, and J1BC models.

ENERGY INFORMATION

MODEL SPECIFIC ENERGY DATA

Energy consumption and refrigerant details for J1BCF and WBC70 models.

SPARE PARTS INFORMATION

SOURCING AND ORDERING WILLIAMS SPARE PARTS

Information on obtaining genuine spare parts and contact details for support.

WARRANTY AND CLAIMS PROCEDURE

WARRANTY TERMS AND COVERAGE DETAILS

Details of the 24/12 month warranty, products covered, and general terms of use.

WARRANTY CLAIM PROCESS AND EXCEPTIONS

Procedure for making claims and list of exceptions to standard warranty coverage.

WARRANTY AND CLAIMS PROCEDURE

EXTENDED WARRANTY OPTIONS AND VALIDITY

Information on purchasing extended warranty coverage and its validity requirements.