Chapter 3 First-Time Use
Standard delivery
10 4400 Mobile Phone Tester Series Serial number 0911xxx
Standard delivery
The standard delivery includes:
– an instrument from the 4400 series (4403 or 4405)
– the manual pack including this getting started manual
– the calibration report
– a power cable
Power connector
Connect the supplied power cable to the line socket of the power
supply module (rear of 4400) and then to a power outlet with a
ground contact.
Switch on the 4400. The power switch is located on the rear of the
4400, above the socket of the power cable. The 4400 is in stand-
by mode now.
Options
If you ordered the 4400 together with options, these options are
already installed and ready for use when you switch on the
instrument.
Cardboard box
Keep the cardboard box for shipping the 4400 back to Willtek
e.g. for factory calibration or a model upgrade.
Supply voltage
Before powering on, ensure that the operating voltage at your
location is permitted for 4400 (90 to 140 V
AC
or 200 to
250 V
AC
).
The 4400 adjusts itself automatically to the applied (permissi-
ble) line voltage.
GetStrt.book Seite 10 Dienstag, 21. März 2006 3:22 15
To Next Page
Loading...
