INSTALLATION GUIDE
1. Make sure that all the packing materials are removed from inside the microwave door.
2. Check the microwave for damage, such as misaligned or bent door, damaged door seals and sealing
surface, broken or loose door hinges and latches, and dents inside the cavity or on the door. If there are any
damages, do not operate the microwave and contact Customer Service at 1-800-324-0340.
3. This microwave must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be
cooked inside.
4. Do not place the oven where heat, moisture, or high humidity is generated. Do not place microwave near
combustible materials.
5. For correct operation, the oven must have sufficient airflow. Allow 8” of space above the microwave, 4” at
back and 2”on each side of the unit.
6. The appliance should only be used on a countertop over 3 feet above the floor.
7. This appliance should be serviced only by qualified service personnel, contact nearest authorized service
facility for examination, repair, or adjustment.
8. Do not cover or block any openings on the microwave. Do not remove microwave feet. Do not operate the
oven without glass tray, roller support, and shaft in their proper positions.
9. Make sure that power cord is undamaged and does not run under the microwave or over any hot or sharp
surface.
10.The socket must be readily accessible so the microwave oven can be easily unplugged in an emergency.
INSTALLING THE TURNTABLE
Never place the glass tray upside down.
The glass tray should never be restricted.
Both the glass tray and turntable ring assembly must always be used during cooking.
All food and containers of food should always be placed on the glass tray for cooking.
If the glass tray or turntable ring assembly cracks or breaks, call customer service 1-800-324-0340.
4
To Next Page
Loading...