Preventive Maintenance
Inspection 5
dehumidifier.
6
soft brush and vacuum-clean/compressed air.
Mount the cover and put the water tank back
Note:
Check that the water tank is fitted
correctly.
Annual
Step
2 Vacuum-clean the unit, be very thorough with the condenser and the
3
• Fan blades
4 Carefully clean the unit (be extra careful around the fins) with water,
8 Check that the hour meter is running, see "Product and functional description
page 3 - 4.
Action
Monthly Step Action Illustration
Lift the cover and clear of the
Clean the evaporator coil by brushing with a
in place.
Follow the procedure to carry out the annual preventive maintenance.
Inspection:
1 Carry out the monthly maintenance as described above.
evaporator.
If the unit is very dirty, move on to step 3 and 4 - otherwise move on to
step 5.
Spray water based soap on the:
• Evaporator-/condensor coil
using a household spray or similar item.
however, not directly on electrical components.
5 Check the fan.
6 Mount front-and rear cover and water tank.
7 Check and tighten all cover plate screws when necessary.
10
To Next Page
Loading...